Another n00b question?
#1
Another n00b question?
Here it goes
got a b16a1 with a put together turbo kit.
fmu and walbro fuel pump.I know its not the best but it's what i got.stock injectors.I've got a blox missing link.The only thing i changed to the stock set I had was the fuel pump,and drilled for the oil return line.I just can't get it to run right.It's spools up and I'n getting about 4 pounds of boost.(xs contoller)But it is running un goddly rich.Also when i have the piping put on Vtec will not engage.But once i undo the piping Vtec is back.
I know there are better ways for management out there but thios is the stuff i got and don't really have the money or the time for the others.Please any help would be aprrectiated.Try no to talk to much crap about how i could blow my engine cuz i know,thatys why I'm here.
got a b16a1 with a put together turbo kit.
fmu and walbro fuel pump.I know its not the best but it's what i got.stock injectors.I've got a blox missing link.The only thing i changed to the stock set I had was the fuel pump,and drilled for the oil return line.I just can't get it to run right.It's spools up and I'n getting about 4 pounds of boost.(xs contoller)But it is running un goddly rich.Also when i have the piping put on Vtec will not engage.But once i undo the piping Vtec is back.
I know there are better ways for management out there but thios is the stuff i got and don't really have the money or the time for the others.Please any help would be aprrectiated.Try no to talk to much crap about how i could blow my engine cuz i know,thatys why I'm here.
#6
Re: Another n00b question?
just buy the chipping kit and do it yourself, its real easy. I did mine without hardly any soldering expirience by just looking as some pics of chipped ecu's. It cost $25 for the chip kit, $45 for the chip burner and $50 for the injectors. crome is software that you can get for free online, its cheap and works great. You could sell your fmu to some stupid dumb *** ricer piece of ---- and have more than half of it payed for already.
Thread
Thread Starter
Forum
Replies
Last Post