Another DIY Manifold.
#42
Re:Another DIY Manifold.
Originally Posted by cion
That ---- is awesome. Those elbows are 4.50 each in Stainless and I cant believe full race charges 1000 dollars for that manifold. gj man.
The price on that is 5.89 but still a great deal!
#43
Re:Another DIY Manifold.
I'm sure hes using Schedual 10 304 1.5in stainless pipe, pretty much the same stuff we make all our manifolds with.
SCH10 is plenty thick for a manifold like this.
Mcmaster Part #
45735K215 (price 4.33)
And if you want a Straight peice of pipe to match these elbows you can get that from mcmaster as well.
Mcmaster part#
4347K58 (price $41.4
It only comes in 6 feet sections, and I think shipping is kinda spendy too.
Jeff
SCH10 is plenty thick for a manifold like this.
Mcmaster Part #
45735K215 (price 4.33)
And if you want a Straight peice of pipe to match these elbows you can get that from mcmaster as well.
Mcmaster part#
4347K58 (price $41.4
It only comes in 6 feet sections, and I think shipping is kinda spendy too.
Jeff
#44
Re:Another DIY Manifold.
Originally Posted by cion
That ---- is awesome. Those elbows are 4.50 each in Stainless and I cant believe full race charges 1000 dollars for that manifold. gj man.
#45
Re:Another DIY Manifold.
maybe it is 10. i guess we will have to wait and see what he says. Either way i found some lengths of pipe at one of the local scrap yards for 1.50 a pound so ill probably just pick up a bit of that for the collector.
#46
Re:Another DIY Manifold.
Originally Posted by AbaZ
Originally Posted by cion
That ---- is awesome. Those elbows are 4.50 each in Stainless and I cant believe full race charges 1000 dollars for that manifold. gj man.
Full race doesnt use plumbers elbows to make their manifolds either.
#47
Re:Another DIY Manifold.
Originally Posted by AbaZ
I'm sure hes using Schedual 10 304 1.5in stainless pipe, pretty much the same stuff we make all our manifolds with.
SCH10 is plenty thick for a manifold like this.
Mcmaster Part #
45735K215 (price 4.33)
And if you want a Straight peice of pipe to match these elbows you can get that from mcmaster as well.
Mcmaster part#
4347K58 (price $41.4
It only comes in 6 feet sections, and I think shipping is kinda spendy too.
Jeff
SCH10 is plenty thick for a manifold like this.
Mcmaster Part #
45735K215 (price 4.33)
And if you want a Straight peice of pipe to match these elbows you can get that from mcmaster as well.
Mcmaster part#
4347K58 (price $41.4
It only comes in 6 feet sections, and I think shipping is kinda spendy too.
Jeff
And damnit I just ordered Schedule 40 bends and didnt need to.
Sched40:
OD = 1.9"
ID = 1.6"
Wall = .150"
Sched10:
OD = 1.9"
ID = 1.682"
Wall = .109"
Wall Difference = .041"
#48
Re:Another DIY Manifold.
Originally Posted by ComputerJLT
yeah because the bends they use cost $80 each huh
Btw, schedual 40 is a hoe to cut in your average chop saw. Hell sch 10 is bad as it is.
#49
Re:Another DIY Manifold.
Originally Posted by AbaZ
Originally Posted by ComputerJLT
yeah because the bends they use cost $80 each huh
Btw, schedual 40 is a hoe to cut in your average chop saw. Hell sch 10 is bad as it is.