hard2obtain

My question are if i can run d16z6 stock inyectors at 8psi, im low budget so heres my setup:

mithsu tc05 -- free
std manifold -- free
adapter plate -- 15
oil / water lines -- 20
isuzu stylus intercooler -- 25 (yunkyard)
pipping -- 30
safc -- 120 (used)
stock inyectors

TOTAL --- 210 lol

SpankedYA!

Yes you can! Just take pictures of the mess it makes afterwards!

hard2obtain

of course, im on that!

HondaTuner

lmao.

READ

lumpenst

stock is 240cc so it wont be enough after ~130 bhp at the cranck with a turbo.. dsm 450's used are cheap get one

jeffescortlx

Well, if your not gonna chip your ECU and get larger injectors, a FMU would'nt be a bad idea..better then nothen.

hard2obtain

i read posts of people who use stock inyectors at 9 psi.

http://www.turbod16.com/viewtopic.php?t=4140

lumpenst

if they have raised the fuel pressure 60 psi (which is not possible with stock rails) and are using their injectors at %100 duty cycle (which will harm them in short time) and are running a decent sized turbo at 9 psi (which approx will put out 200 hp at the cranck) they are still lean and will destroy the engine.. and this is not with an afc but a chipped ecu.. either they have a tiny turbo or they are just idiots
calculate for yourself:
http://www.rceng.com/technical.htm