8psi on stock inyectors?
 

My question are if i can run d16z6 stock inyectors at 8psi, im low budget so heres my setup:

mithsu tc05 -- free
std manifold -- free
adapter plate -- 15
oil / water lines -- 20
isuzu stylus intercooler -- 25 (yunkyard)
pipping -- 30
safc -- 120 (used)
stock inyectors

TOTAL --- 210 lol

Re: 8psi on stock inyectors?
 

Yes you can! Just take pictures of the mess it makes afterwards!

Re: 8psi on stock inyectors?
 

of course, im on that!

Re: 8psi on stock inyectors?
 

lmao.

READ

Re: 8psi on stock inyectors?
 

stock is 240cc so it wont be enough after ~130 bhp at the cranck with a turbo.. dsm 450's used are cheap get one

Re: 8psi on stock inyectors?
 

Well, if your not gonna chip your ECU and get larger injectors, a FMU would'nt be a bad idea..better then nothen.

Re: 8psi on stock inyectors?
 

i read posts of people who use stock inyectors at 9 psi.

http://www.turbod16.com/viewtopic.php?t=4140

Re: 8psi on stock inyectors?
 

Not with an AFC, you ------- dolt.

Read the engine management faq.

Re: 8psi on stock inyectors?
 

if they have raised the fuel pressure 60 psi (which is not possible with stock rails) and are using their injectors at %100 duty cycle (which will harm them in short time) and are running a decent sized turbo at 9 psi (which approx will put out 200 hp at the cranck) they are still lean and will destroy the engine.. and this is not with an afc but a chipped ecu.. either they have a tiny turbo or they are just idiots
calculate for yourself:
http://www.rceng.com/technical.htm