Forced Induction Custom FI Setup Questions

86 300zx no start

Thread Tools
 
Search this Thread
 
Old 02-06-2004, 07:06 PM
  #1  
0.5 BAR
Thread Starter
 
high c's Avatar
 
Join Date: Mar 2003
Posts: 114
Default 86 300zx no start

i just got an 86 300zx....v6 turbo, i got it for a real good price but it wount start it will crank all day and it has good spark and it is getting fuel and it has a new distributor. any help would be cool


Sean
high c is offline  
Old 02-06-2004, 07:08 PM
  #2  
0.0 BAR
 
Reddy's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re:86 300zx no start

timing
Reddy is offline  
Old 02-06-2004, 07:17 PM
  #3  
0.5 BAR
Thread Starter
 
high c's Avatar
 
Join Date: Mar 2003
Posts: 114
Default Re:86 300zx no start

cam timming or distributor?
high c is offline  
Old 02-06-2004, 07:22 PM
  #4  
0.0 BAR
 
Reddy's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re:86 300zx no start

timing is timing, they're both the same there's just 2 ways of adjusting it. Put a timing light on it and see where it sits. Than move onto your cam timing and make sure your cams are sitting where they're supposed to be.

If you have fuel and spark (everything else is mechanically sound) than you just need them to so what they have to do at the right time. It has to start with correct timing, spark and fuel
Reddy is offline  
Old 02-06-2004, 08:41 PM
  #5  
1.5 BAR
 
MR_DR_PEP's Avatar
 
Join Date: Dec 2002
Location: Nashville
Posts: 807
Default Re:86 300zx no start

My friend has one of those and it's got some decent torque below 4000 rpm. Fun to drive, I like 'em.
MR_DR_PEP is offline  
Old 02-06-2004, 10:35 PM
  #6  
1.0 BAR
 
crxfreak88's Avatar
 
Join Date: Nov 2003
Posts: 290
Default Re:86 300zx no start

If it has a maf ; unplug it. When it cranks does it crank over smoothly. Ive worked on a couple of those and the main problem ive seen with them is that the wire harness starts to break. The wires themselves. Im assuming you bought it not running. Check you cam timing. Get Cylinder number 1 at TDC TAke out the spark plug and stick a coat hanger in there ; turn the engine by hand. Dont get the hanger caught in there!. Once you do that check you timing marks and see you off if at all you are. While youre at it take the distributor cap off and make sure the rotor is pointing to cylinder #1.Have you checked the plugs make sure they are not fouled out . My two cents , hope i helped
crxfreak88 is offline  
Old 02-07-2004, 01:25 PM
  #7  
0.5 BAR
Thread Starter
 
high c's Avatar
 
Join Date: Mar 2003
Posts: 114
Default Re:86 300zx no start

ya i looked at the plugs and they look fine so ill check the timming, thanks for all the help
high c is offline  
Old 02-07-2004, 01:34 PM
  #8  
0.5 BAR
Thread Starter
 
high c's Avatar
 
Join Date: Mar 2003
Posts: 114
Default Re:86 300zx no start

oh ya, when i crank it, it turns over like it wants to start and i did buy it not running, the man i got it from sead that it hade key switch probloms....i dont really think it could be that because it cranks over any input on that would help also
high c is offline  
Old 02-07-2004, 05:20 PM
  #9  
1.0 BAR
 
crxfreak88's Avatar
 
Join Date: Nov 2003
Posts: 290
Default Re:86 300zx no start

Are you positive its getting fuel? Squirt some carb cleaner in there. Have you tried moving the timing around while cranking it? Let us know if you have done that. So we can help
crxfreak88 is offline  
Old 02-07-2004, 05:26 PM
  #10  
0.5 BAR
Thread Starter
 
high c's Avatar
 
Join Date: Mar 2003
Posts: 114
Default Re:86 300zx no start

got ya
high c is offline  


Quick Reply: 86 300zx no start



All times are GMT -5. The time now is 02:31 AM.