86 300zx no start
i just got an 86 300zx....v6 turbo, i got it for a real good price but it wount start :-[it will crank all day and it has good spark and it is getting fuel and it has a new distributor. any help would be cool
Sean |
Re:86 300zx no start
timing
|
Re:86 300zx no start
cam timming or distributor?
|
Re:86 300zx no start
timing is timing, they're both the same there's just 2 ways of adjusting it. Put a timing light on it and see where it sits. Than move onto your cam timing and make sure your cams are sitting where they're supposed to be.
If you have fuel and spark (everything else is mechanically sound) than you just need them to so what they have to do at the right time. It has to start with correct timing, spark and fuel |
Re:86 300zx no start
My friend has one of those and it's got some decent torque below 4000 rpm. Fun to drive, I like 'em.
|
Re:86 300zx no start
If it has a maf ; unplug it. When it cranks does it crank over smoothly. Ive worked on a couple of those and the main problem ive seen with them is that the wire harness starts to break. The wires themselves. Im assuming you bought it not running. Check you cam timing. Get Cylinder number 1 at TDC TAke out the spark plug and stick a coat hanger in there ; turn the engine by hand. Dont get the hanger caught in there!. Once you do that check you timing marks and see you off if at all you are. While youre at it take the distributor cap off and make sure the rotor is pointing to cylinder #1.Have you checked the plugs make sure they are not fouled out . My two cents , hope i helped
|
Re:86 300zx no start
ya i looked at the plugs and they look fine so ill check the timming, thanks for all the help
|
Re:86 300zx no start
oh ya, when i crank it, it turns over like it wants to start and i did buy it not running, the man i got it from sead that it hade key switch probloms....i dont really think it could be that because it cranks over ??? any input on that would help also
|
Re:86 300zx no start
Are you positive its getting fuel? Squirt some carb cleaner in there. Have you tried moving the timing around while cranking it? Let us know if you have done that. So we can help ;)
|
Re:86 300zx no start
got ya ;D
|
All times are GMT -5. The time now is 09:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands