|
Re: 450cc dsm injectors
Yeah I know what you mean man.
|
Re: 450cc dsm injectors
Where/how do they not fit? If they dont fit in the intake, bore out the big rubber things. I find a dremel sanding drum does the job perfectly.
|
Re: 450cc dsm injectors
Originally Posted by turbonosteg
i dont know why when someone asks for help some people have to be assholes
You have to modify both the seal and the clip area to make them fit... |
Re: 450cc dsm injectors
that all that had to be said no one has to be a dickhead i dont care how many times it was asked
|
Re: 450cc dsm injectors
That's great thanks man! I wanna ask one more question. I installed the injectors and everything totall setup is in. I am running a t3/t4, Tial 35mm BOV,Tial 35mm wastegate(screw on top is missing)(they say that normal), And an FMU and Running open headers. When I ran the car on the stock injectors it would not rev good at all it would sputter. When I installed the DSM 450cc injectors the car was going crazy at idel and if I gassed the car it would just die. Now honestly I did not read up much on the injectors but I would like to know if with out the resistors will that cause it to do that? Also I did not install a missing like. Without that or check valves will It just throw a CEL or will it cause the car to drive like ----? Thanks guys I hope I was extremly clear this time. Running stock LS
|
Re: 450cc dsm injectors
1) you cannot run "open headers" with a t3/t4.
2) You can not run 450cc injectors with an FMU 3) OMG, ur not running any resistors either? Honestly, do you think people install the resistors for the fun of it, or maybe they're trying to keep their injectors/ECU from getting fried 4) You're not gonna need check valves, cuz you're gonna get some form of fuel management, cuz your car wont run without it. |
Re: 450cc dsm injectors
Originally Posted by honura
That's great thanks man! I wanna ask one more question. I installed the injectors and everything totall setup is in. I am running a t3/t4, Tial 35mm BOV,Tial 35mm wastegate(screw on top is missing)(they say that normal), And an FMU and Running open headers. When I ran the car on the stock injectors it would not rev good at all it would sputter. When I installed the DSM 450cc injectors the car was going crazy at idel and if I gassed the car it would just die. Now honestly I did not read up much on the injectors but I would like to know if with out the resistors will that cause it to do that? Also I did not install a missing like. Without that or check valves will It just throw a CEL or will it cause the car to drive like ----? Thanks guys I hope I was extremly clear this time. Running stock LS
|
Re: 450cc dsm injectors
Ok OK Im running open downpipe! Anyways I did not have a chance to go to radio shack and buy the resisters. I don't have cash till about another week or so, so till them I will have to run with what I have. Can someone help me!!!!!!!!!! hahah Flame away Im learning. Please help.
|
Re: 450cc dsm injectors
Your car is pretty much fucked with you as the mechanic. You obviously have no clue what you are doing. Please stop and don't drive your car until you learn what the ---- you are doing!
|
| All times are GMT -5. The time now is 05:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands