2000gsr with revhard kit, problem, FOUND OUT WHATS WRONG

Reply Subscribe

Thread Tools

Search this Thread

08-25-2004, 12:59 PM

#21

Scottsi

Guest

Posts: n/a

Re:2000gsr with revhard kit, problem, help me out

also, when this setup was partly done the dumbass taht owned it drove it around with no MAP sensor connected and no o2 sensors and open turbo, could that have dirty'd the dizzy up, and there is a lil crack in the dizzy cap

08-25-2004, 01:04 PM

#22

projekteg

3.0 BAR

Join Date: Apr 2003

Posts: 11,058

Re:2000gsr with revhard kit, problem, help me out

who knows, i would try spittin the fuel out first and reset the ecu if he was driving around with no sensors plugged in. if that doesn't work. i would start troubleshooting the dizzy.

08-25-2004, 01:09 PM

#23

88crxSi

3.0 BAR

Join Date: Feb 2003

Posts: 9,089

Re:2000gsr with revhard kit, problem, help me out

Quote:

Originally Posted by Scottsi

was the turbo installed though, like, hooked up to the intake charge pipes etc..

my god.. to think what he could have done.

08-25-2004, 11:27 PM

#24

Scottsi

Guest

Posts: n/a

Re:2000gsr with revhard kit, problem, help me out

yeah this guy is a stupid ***, i'll try what you guys said then i'll get back to you, i had him order a coil

08-25-2004, 11:39 PM

#25

J-SMITH69

0.0 BAR

Join Date: Dec 2002

Posts: 0

Re:2000gsr with revhard kit, problem, help me out

Quote:

Originally Posted by crx88Si

Quote:

Originally Posted by Scottsi

was the turbo installed though, like, hooked up to the intake charge pipes etc..

my god.. to think what he could have done.

umm nothing... why would driving it NA with a huge restriction in the way of the exhaust make it not start... even running without the MAP hook'd up won't make it not start. running with the fuel pressure reg off and it'll STILL START lol.

08-25-2004, 11:44 PM

#26

StanB

1.5 BAR

Join Date: Sep 2003

Posts: 842

Re:2000gsr with revhard kit, problem, help me out

Do you have a kill switch? If you do, you might have activated it.

08-26-2004, 05:52 PM

#27

Scottsi

Guest

Posts: n/a

Re:2000gsr with revhard kit, problem, help me out

ok, i tried the dizzy on another car, and it started, i cranked it without the plugs/injector clips on it either, and it still wont start, WTF what the ------ ----

08-26-2004, 06:12 PM

#28

chevy

1.5 BAR

Join Date: Oct 2003

Posts: 831

Re:2000gsr with revhard kit, problem, help me out

make sure all the sensors are pluged in ..reset the ecu
..just go through the whole car and make sure everything is hooked up right..

08-28-2004, 04:25 PM

#29

Scottsi

Guest

Posts: n/a

Re:2000gsr with revhard kit, problem, FOUND OUT WHATS WRONG

okay, the engine is dead, i comp tested it over and over, 50 50 45 45, what he did, was drive it on the freeway with the wastegate nipple not connected right, no primary o2 sensor, no secondary o2 sensor, no map sensor... so he says its dying in 5th so he downshifts to 4th and floors it, and its at about 6k rpm. well 6k rpm with no wastegate on a high cr engine (it has 50k on it) = bye bye. end of story.