turbofab

Newb here, great site , lots of great info. Looking for some suggestions.
Garret t3/t4
pfab log manifold (retains A/C)
Ebay ETD intercooler
2.5" IC piping
2.5" downpipe
38mm tial WG
Greddy type RS BOV
What size injectors? What to use for tuning? Obd1 conversion? Compressor inlet sits very close to the block. Suggestions please.

-SKUM-

Rock some 450s and obd2-1 conversion and crome.

HiProfile

As long as the comp housing doesn't touch the block and there's enough room to slip a coupler over it (for filter/intake tube), it should be ok. Otherwise you'll have to get a smaller AR exhaust housing or have someone reweld the t3 flange.

I would suggest finding a local tuner, and using the EMS that he usually tunes with. For example, saving money on Crome isn't worth it if the tuner blows your motor because he's used to Hondata.

turbofab

quote author=ratcityrex link=topic=77113.msg918418#msg918418 date=1174889388]
Rock some 450s and obd2-1 conversion and crome.
[/quote] 450cc's. What if the guy decides to sleeve and build the bottom end later. Should he just buy the bigger injectors right now?

turbofab

Pics of the intercooler pipes and beginning of downpipe that I welded up. 2.5" mild steel from race solutions mandrel kit. Cheap *** price for 2 180's, 2 90's, and 2 45's.

turbofab

I got all of my ---- from -------------
440cc inj
Crome pro
chipped obd1 ecu
obd2-1 harness
255 fuel pump
ostrich
6lbs of boost 11.4:1 Air fuel ratio.
Runs pretty good. Just need some brake dyno time and little more boost.