1999 Civic si DIY build
3 Attachment(s)
Newb here, great site , lots of great info. Looking for some suggestions.
Garret t3/t4 pfab log manifold (retains A/C) Ebay ETD intercooler 2.5" IC piping 2.5" downpipe 38mm tial WG Greddy type RS BOV What size injectors? What to use for tuning? Obd1 conversion? Compressor inlet sits very close to the block. Suggestions please. |
Re: 1999 Civic si DIY build
Rock some 450s and obd2-1 conversion and crome.
|
Re: 1999 Civic si DIY build
As long as the comp housing doesn't touch the block and there's enough room to slip a coupler over it (for filter/intake tube), it should be ok. Otherwise you'll have to get a smaller AR exhaust housing or have someone reweld the t3 flange.
I would suggest finding a local tuner, and using the EMS that he usually tunes with. For example, saving money on Crome isn't worth it if the tuner blows your motor because he's used to Hondata. |
Re: 1999 Civic si DIY build
2 Attachment(s)
quote author=ratcityrex link=topic=77113.msg918418#msg918418 date=1174889388]
Rock some 450s and obd2-1 conversion and crome. [/quote] 450cc's. What if the guy decides to sleeve and build the bottom end later. Should he just buy the bigger injectors right now? |
Re: 1999 Civic si DIY build
1 Attachment(s)
Pics of the intercooler pipes and beginning of downpipe that I welded up. 2.5" mild steel from race solutions mandrel kit. Cheap ass price for 2 180's, 2 90's, and 2 45's.
|
Re: 1999 Civic si DIY build
I got all of my ---- from -------------
440cc inj Crome pro chipped obd1 ecu obd2-1 harness 255 fuel pump ostrich 6lbs of boost 11.4:1 Air fuel ratio. Runs pretty good. Just need some brake dyno time and little more boost. |
All times are GMT -5. The time now is 03:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands