13b 14b oil line kit
#1
13b 14b oil line kit
ok i got a 13b(yeah i know its small but i got it for free). I need a oil line kit but i dont know the size of the fittings. Anyone know? Or does anyone know if they are the same fittings as a 14b? I also need to know the dimesions of the return line. if anyone turboed a d15 with 13b i got some questions for you . so if you guys can help me out ill be almost ready for install thanx
#2
Re:13b 14b oil line kit
If I can remeber, The turbo is from some chrysler like a spirit or so.
If it is, the fitting on mine were different. I got a Te04 (from a spirit) first, it was fucked so I went to a 14b(tdo5 from a M/T Talon) and the fitting were different
If it is, the fitting on mine were different. I got a Te04 (from a spirit) first, it was fucked so I went to a 14b(tdo5 from a M/T Talon) and the fitting were different
#3
Re:13b 14b oil line kit
Originally Posted by bumblezc
If I can remeber, The turbo is from some chrysler like a spirit or so.
If it is, the fitting on mine were different. I got a Te04 (from a spirit) first, it was fucked so I went to a 14b(tdo5 from a M/T Talon) and the fitting were different
If it is, the fitting on mine were different. I got a Te04 (from a spirit) first, it was fucked so I went to a 14b(tdo5 from a M/T Talon) and the fitting were different
#4
Re:13b 14b oil line kit
I can tell you that some of the lines are different. We put a 16g on my friends 93 automatic GSX eclipse and had to make alot of the lines fit. If I remember correctly the oil feed and return lines were the same but the water lines were different. The banjo bolts that screw into the turbo were smaller on the 13g. Maybe that helped a little.
#5
Re:13b 14b oil line kit
Take it to home(boy)depot and test fit some threaded bolts into it until you find the right size. (hardware section)
Then get your drain flange mounting bolt holes in site, and take a measurement from the center of one side to the center of the other. Send me those dimensions and you're
MINT. <---HAHA, I got that from hotrex
Then get your drain flange mounting bolt holes in site, and take a measurement from the center of one side to the center of the other. Send me those dimensions and you're
MINT. <---HAHA, I got that from hotrex
#8
Re:13b 14b oil line kit
Originally Posted by Stealthmode
Take it to home(boy)depot and test fit some threaded bolts into it until you find the right size. (hardware section)
Then get your drain flange mounting bolt holes in site, and take a measurement from the center of one side to the center of the other. Send me those dimensions and you're
MINT. <---HAHA, I got that from hotrex
Then get your drain flange mounting bolt holes in site, and take a measurement from the center of one side to the center of the other. Send me those dimensions and you're
MINT. <---HAHA, I got that from hotrex
Thread
Thread Starter
Forum
Replies
Last Post
sexi_b00sted_B
Turbo Parts For Sale
15
07-18-2006 02:33 PM
oxsleeperxo
Forced Induction
10
12-13-2004 10:25 PM