13B rotary engine, minus rotors, crank and oil pan.
07-15-2006, 04:36 AM
#1
0.5 BAR
Thread Starter
Join Date: Apr 2006
Posts: 55
13B rotary engine, minus rotors, crank and oil pan.
OK, I know ppl are going to talk ---- cuz I don't have a pic up, but I just got home from philly and it's 4:54 am, and I decided I'm tired of all the ---- in my basement. I'll move stuff around tomorrow and take pics, but the title says it all. It's all assembled, just doesn't have rotors, a crank, or an oil pan on it. Just make an offer on it, and you can have it. I'm located in Reading PA, 19604. Thanks!
Oh yea, and I forgot I have both a fuel injection setup, and a carbeurated setup, for the 13B with a 4 barrel carb.
Here's some other stuff I have layin around also. Everything's best offer. Also add 3% for paypal, and shipping. I'm always willing to meet ppl too. I love driving. lol.
96 Y8 head. Dropped valves in cylinders 2 & 4. I honestly don't know what to ask for since in single cam, and needs work so just make an offer.
OBD1 DX intake manifold. $50 OBO
00 Y8 Intake manifold. If needed I can get the air injection welded up at work. I epoxied the holes shut but ended up finding the 96 head, and used that mani for the guy's car. $60
93 EG Si seats, front and back. MINTY FRESH!!! I'd rather these were piced up, but if you wanna pay shipping, I guess I can do it. $120 front and rear or $80 front, $40 rear... OBO!!!!!!!!
white power DC mirrors, with both plugs and plenty of wire. I think they're from a 2 door but not positive. $40
CRX Si floor mats. One is missing the CR the other is fine. I have to clean em up, but they're a lil beat! $25
99 DC black armrest. I actually might keep this to put in the EK I'll hopefully be getting, but if you want it, make an offer and I'd probably sell it.
00 EX injectors. I don't know what cc they are, but they were too big for my homies 96 DX. At least I'm guessin they were. It may have been the fuel rail, or FPR, ar the leaky intake mani. lol. No idea what they're worth so $ Best offer!
B18B crank, with (I was told) under 40K miles.- $75
LS valve cover- $40
and some more ----...
A brand new fuel pump. Master Fuel pump part #8023 I think. It's a pump for Turbo talons, Eclipses, and I think it even comes in older accords. Had one in my EG, it fit with a zip tie, and a lil muscle putting the lil hose on! $50
99 P2E ecu... it's automatic I think, 99 so it's OBD2B... I think again. whatever it's worth to you. I'll never need it.
I also have, but need to take pics of...
-89 CRX Si interior plastics, rear compartment, beat up door panels, a-pillar covers, and a buncha misc. parts.
-d15b7 full engine just disassembled. just missing, valve cover, cam gear, throttlebody, and main pulley. Will part out if you need anything at all!!!
-B18A short block, bare with tapped oil pan, and main caps. I need another oil pan, so trade me! I didn't tap the pan it was a friends, so don't hate on the ugliness.
-DA z3 fenders. one is missing the piece below the molding. You'd have to re-glass it. I can do it for you, but you'd have to pay me first!
Oh yea, and I forgot I have both a fuel injection setup, and a carbeurated setup, for the 13B with a 4 barrel carb.
Here's some other stuff I have layin around also. Everything's best offer. Also add 3% for paypal, and shipping. I'm always willing to meet ppl too. I love driving. lol.
96 Y8 head. Dropped valves in cylinders 2 & 4. I honestly don't know what to ask for since in single cam, and needs work so just make an offer.
OBD1 DX intake manifold. $50 OBO
00 Y8 Intake manifold. If needed I can get the air injection welded up at work. I epoxied the holes shut but ended up finding the 96 head, and used that mani for the guy's car. $60
93 EG Si seats, front and back. MINTY FRESH!!! I'd rather these were piced up, but if you wanna pay shipping, I guess I can do it. $120 front and rear or $80 front, $40 rear... OBO!!!!!!!!
white power DC mirrors, with both plugs and plenty of wire. I think they're from a 2 door but not positive. $40
CRX Si floor mats. One is missing the CR the other is fine. I have to clean em up, but they're a lil beat! $25
99 DC black armrest. I actually might keep this to put in the EK I'll hopefully be getting, but if you want it, make an offer and I'd probably sell it.
00 EX injectors. I don't know what cc they are, but they were too big for my homies 96 DX. At least I'm guessin they were. It may have been the fuel rail, or FPR, ar the leaky intake mani. lol. No idea what they're worth so $ Best offer!
B18B crank, with (I was told) under 40K miles.- $75
LS valve cover- $40
and some more ----...
A brand new fuel pump. Master Fuel pump part #8023 I think. It's a pump for Turbo talons, Eclipses, and I think it even comes in older accords. Had one in my EG, it fit with a zip tie, and a lil muscle putting the lil hose on! $50
99 P2E ecu... it's automatic I think, 99 so it's OBD2B... I think again. whatever it's worth to you. I'll never need it.
I also have, but need to take pics of...
-89 CRX Si interior plastics, rear compartment, beat up door panels, a-pillar covers, and a buncha misc. parts.
-d15b7 full engine just disassembled. just missing, valve cover, cam gear, throttlebody, and main pulley. Will part out if you need anything at all!!!
-B18A short block, bare with tapped oil pan, and main caps. I need another oil pan, so trade me! I didn't tap the pan it was a friends, so don't hate on the ugliness.
-DA z3 fenders. one is missing the piece below the molding. You'd have to re-glass it. I can do it for you, but you'd have to pay me first!
07-15-2006, 09:10 PM
#4
0.5 BAR
Thread Starter
Join Date: Apr 2006
Posts: 55
Re: 13B rotary engine, minus rotors, crank and oil pan.
man homes, I hope you don't want me to ship it... I had a full engine also but ended up leaving it in a storage b/c it was too heave. This thing weighs a TON! As for price, just make me an offer. All the puerto Ricans around here build rotary, but they're all too cheap. The just want me to give it to em. So any offer is cool wit me. I'll even take trades, if you have anything I might need.
07-15-2006, 09:19 PM
#5
3.0 BAR
Join Date: Feb 2003
Posts: 1,625
Re: 13B rotary engine, minus rotors, crank and oil pan.
someone should buy that vtec head from him and then buy my head thats missing the cam and rockers with 28k on it, then you can combine them and have a SUPER low milage y8 head!! im not thread jacking, im trying to help you sell your head.
07-16-2006, 09:06 PM
#7
0.5 BAR
Thread Starter
Join Date: Apr 2006
Posts: 55
Re: 13B rotary engine, minus rotors, crank and oil pan.
damn, all this ----, and no one needs anything!?!?! I also have a front and rear Del Sol Si suspension... I might throw the rears on the EK, but since I bought the Teins for it already, and I plan on getting a 5 lug, I'll probably just sell it.
07-16-2006, 09:15 PM
#8
1.5 BAR
Join Date: Feb 2005
Posts: 1,181
Re: 13B rotary engine, minus rotors, crank and oil pan.
well im saying pa and ohio are right next to eachother....i dont know what that block/ motor would be worth i just got into rx7's ...also what kinda carb is on that mani i might want all of that stuff...i'll trade you a a d15 and a6 head..and a few other things i dont need and maybe some cash for some stuff just let me know thanks
-Zach
-Zach
07-16-2006, 09:23 PM
#9
0.5 BAR
Thread Starter
Join Date: Apr 2006
Posts: 55
Re: 13B rotary engine, minus rotors, crank and oil pan.
well the d15, and a6 head won't do me any good... I already have a d15 I'm tryin to get rid of. I'm building b-series turbo, so those are the parts I'd need. Since neither of us know what kind of price, I'll just throw one out there. How about $150 for everything?
07-17-2006, 01:59 AM
#10
0.0 BAR
Join Date: Apr 2006
Posts: 0
Re: 13B rotary engine, minus rotors, crank and oil pan.
Originally Posted by sexi_b00sted_B
OK, I know ppl are going to talk ---- cuz I don't have a pic up, but I just got home from philly and it's 4:54 am, and I decided I'm tired of all the ---- in my basement. I'll move stuff around tomorrow and take pics, but the title says it all. It's all assembled, just doesn't have rotors, a crank, or an oil pan on it. Just make an offer on it, and you can have it. I'm located in Reading PA, 19604. Thanks!
