Turbo Bolts are now SuperBolts
#11
0.0 BAR
Thread Starter
Join Date: Apr 2009
Location: Australia, But home town is Invercargill
Posts: 8
Hi....All done! And what a task as it took more than 40mins for each bolt; but slow drill speed was the answer.
I cannot believe just how hard the bolts were. I even buggered two center-punches just trying to mark start point on the actual bolts. Anyway heaps of cutting compound and a good drill press did it in the end. Once through the bolts the rest of the thread just came out after a bit of fiddling about with pliers etc.
Cheers
I cannot believe just how hard the bolts were. I even buggered two center-punches just trying to mark start point on the actual bolts. Anyway heaps of cutting compound and a good drill press did it in the end. Once through the bolts the rest of the thread just came out after a bit of fiddling about with pliers etc.
Cheers
#12
Hi....All done! And what a task as it took more than 40mins for each bolt; but slow drill speed was the answer.
I cannot believe just how hard the bolts were. I even buggered two center-punches just trying to mark start point on the actual bolts. Anyway heaps of cutting compound and a good drill press did it in the end. Once through the bolts the rest of the thread just came out after a bit of fiddling about with pliers etc.
Cheers
I cannot believe just how hard the bolts were. I even buggered two center-punches just trying to mark start point on the actual bolts. Anyway heaps of cutting compound and a good drill press did it in the end. Once through the bolts the rest of the thread just came out after a bit of fiddling about with pliers etc.
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
WTF
General Discussion
26
01-20-2007 04:48 PM
typer
Forced Induction
28
06-30-2003 08:44 AM