Just bought this turbo from crx2211 and I am wondering if anyone has ever tried to shave the compressor discharge flange down so its round and just running a coupler on it....maybe grind it as smooth as possible then weld a tig bead around the end?

 

ive seen it done before but they just cut that flange off and then welded another 2inches or aluminum tubing on it

 

you can also buy an extension for it that screws into the outlet and gives room to clamp a coupler down. I have teh same outlet on my turbo and thats what i used... i think they may have been from ford thunderbirds?

 

Best place to find one these?

 

alum pipe welded on. easiset and best

 

I also just run the stock outlet. They are on eBay, or you can get them if you buy a turbo complete

 

I used a 35/38mm wastegate flange I slotted the wholes on the side and it works like a charm...easiest way other then getting the correct flange cut...

 

I have one of these, if I can find it you can have it for free. I'll look for it tomorrow, I'm not home right now.