Joshb_

Just bought this turbo from crx2211 and I am wondering if anyone has ever tried to shave the compressor discharge flange down so its round and just running a coupler on it....maybe grind it as smooth as possible then weld a tig bead around the end?

t_cel_t

ive seen it done before but they just cut that flange off and then welded another 2inches or aluminum tubing on it

JeenYus

you can also buy an extension for it that screws into the outlet and gives room to clamp a coupler down. I have teh same outlet on my turbo and thats what i used... i think they may have been from ford thunderbirds?

Joshb_

Best place to find one these?

the 13th round

alum pipe welded on. easiset and best

Cray91

I also just run the stock outlet. They are on eBay, or you can get them if you buy a turbo complete

Loserkidwac

I used a 35/38mm wastegate flange I slotted the wholes on the side and it works like a charm...easiest way other then getting the correct flange cut...

reactone

I have one of these, if I can find it you can have it for free. I'll look for it tomorrow, I'm not home right now.