New pipe fittings for manifolds
#34
Re: New pipe fittings for manifolds
Originally Posted by Racing-Solutions
Ah.. JPDC made a product like that way back in the day that we manufactured for them (for that vehicle). They CNC'd the flange so the outlet for the wastegate had an independent discharge from the exhaust stream. On the reverse side of the flange they machined a lip that sat into the turbine housing and seperated the chamber. I believe those were 2.25" outlet and 2" dump though. There is far more room there then it seems. You could do it with just standard radius 2" od x 3" radius no problem. We still build tons of 3000GT parts we developed ... damn near 5 years ago now.
if i was making my own downpipes also, then it would be very easy, but i am trying to make this fit stock and aftermarket pipes
#35
Re: New pipe fittings for manifolds
Wow last time i bought 50+ of sch10 short radius 1.25 elbows they were less the $10 each ... I better buy more before they clue in
I think this is a great idea, the only problem I see is with the leg length. The advantage comes when you can completely eliminate needed to cut/weld a straight section, the problem is depending on the heading it can range from 1" to 6"
Either way I'm keeping an eye on this for next time I remake my personal header. If it goes well I might even put the silly thing into production
I think this is a great idea, the only problem I see is with the leg length. The advantage comes when you can completely eliminate needed to cut/weld a straight section, the problem is depending on the heading it can range from 1" to 6"
Either way I'm keeping an eye on this for next time I remake my personal header. If it goes well I might even put the silly thing into production
#36
Re: New pipe fittings for manifolds
Doing them blind .. Yikes when you dont know the car. They don't have to be anywhere near that tight. Just make sure you hit the outlet location with just a standard 2.5" 2 bolt universal exhaust flange, that will allow you to mate up to stock and aftermarket downpipes. We have literally built hundreds of o2 housings for that car, trust me you don't need a bend anywhere near that tight.
Originally Posted by PhilStubbs
maybe if i had a car here in front of me to work with i could find a way to do it, but all i have are the stock pieces to copy. they are 2 stamped steel halves welded together. the bend in them is super tight. i made a tig out of the stock part and not i really cant get anything standard that i already have to make the bend. i already got glanges from Weir with 2 holes and i am going to weld in a divider to fit down into the turbine housing.
if i was making my own downpipes also, then it would be very easy, but i am trying to make this fit stock and aftermarket pipes
if i was making my own downpipes also, then it would be very easy, but i am trying to make this fit stock and aftermarket pipes
#37
Re: New pipe fittings for manifolds
We are going to mass produce the 1.5" leg, but we are going to stock some odd ball leg lengths.
Originally Posted by levelzero
Wow last time i bought 50+ of sch10 short radius 1.25 elbows they were less the $10 each ... I better buy more before they clue in
I think this is a great idea, the only problem I see is with the leg length. The advantage comes when you can completely eliminate needed to cut/weld a straight section, the problem is depending on the heading it can range from 1" to 6"
Either way I'm keeping an eye on this for next time I remake my personal header. If it goes well I might even put the silly thing into production
I think this is a great idea, the only problem I see is with the leg length. The advantage comes when you can completely eliminate needed to cut/weld a straight section, the problem is depending on the heading it can range from 1" to 6"
Either way I'm keeping an eye on this for next time I remake my personal header. If it goes well I might even put the silly thing into production
Thread
Thread Starter
Forum
Replies
Last Post
deathlucky
Fabrication
0
09-02-2009 08:09 PM
Schwitzer Turbo
Forced Induction
23
03-26-2007 02:51 PM
ward
Forced Induction
3
04-09-2006 10:31 PM
sgoertz
Turbo Parts For Sale
0
02-15-2004 01:29 AM