cage 50 % done woot paint next
3.0 BAR
Joined: Mar 2006
Posts: 5,631
Re: cage 50 % done woot paint next
Originally Posted by SinisterCRX
Make sure to run into a wall near me, so I can score that ramhorn/gt35r, kthx.
0.0 BAR
Joined: Mar 2004
Posts: 0
Re: cage 50 % done woot paint next
I knew that this would turn into a shouting match. I more than respect the effort. Please sift through the name calling and look at the info that is fact that others have listed. It seems as though you are taking every comment as an insult instead of people trying to help you pass tech.
0.0 BAR
Joined: Feb 2005
Posts: 0
Re: cage 50 % done woot paint next
Originally Posted by MADMAX
Well, the book makes is up in the air. It says:
"mild steel welding must be done by approved MIG wire feed or approved TIG heliarc process.Welding must be free of slag and porosity. Any grinding of welds prohibited."
MIG wirefeed? Is there any other non-wirefeed MIG process? I think they may use that term to simply imply wirefeed welding.
A guy I chip ecus for is a NHRA tech inspector, I'll ask him.
0.0 BAR
Joined: May 2005
Posts: 0
Re: cage 50 % done woot paint next
Originally Posted by rawr
MIG = metal inert gas. Fluxcore is not mig.
I know the difference. "MIG wirefeed" process is a redundant phrase. MIG process is wirefeed.
In that case I could use flux-core with gas. NHRA should be more specific and actually list the welding process, like GMAW and GTAW.
His cage could definitely pass. As long as the birdshit is scraped off and the cage painted, it'll pass no problem.
3.0 BAR
Joined: Jan 2003
Posts: 4,398
Re: cage 50 % done woot paint next
dude i wouldnt trust my life to that cage. even if the welds are good, the bar is going to be too close to your head. the main hoop should be tucked very close the the b pillars and the headliner. looks like that bar is going to be hitting your helmet, and if you drive this on the street, you will end up with a busted skull after hitting a small bump. Also it looks to me like those welds are not fully penetrating the tube, the wire is just on top of the tube. i love your setup but ---- man dont end up with a tube in your skull just to pass tech.
tucked nicely + gussets
dont half *** something that will protect your life.
your welds look like #4
tucked nicely + gussets
dont half *** something that will protect your life.
your welds look like #4
