willem (enhanced/dual power) burner how to! *56k/dsl=fucked!*
#31
Re: willem (enhanced/dual power) burner how to! *56k/dsl=fucked!*
Originally Posted by SloS13
Thanks for the writeup(s)! People that take the time out of their day to do writeups are
I ordered my Willem yesterday. Wonder how long shipping from Hong Kong will take.
I ordered my Willem yesterday. Wonder how long shipping from Hong Kong will take.
#33
Re: willem (enhanced/dual power) burner how to! *56k/dsl=fucked!*
----... I finally got this working. I was using Kevins instructions and, 1) could not ID the chip and, 2) kept getting an error when I tried to burn a chip "Error: write sector 0"
I'm using a newer Willem dual burner and an AT29C256 chip.
After some playing around, I figured out that I had my jumper in the wrong place (3 & 30, not 3 & 31), duuuuh. When I changed it, it didn't make a bit of difference!!!
I checked the UD forums and someone suggested using the PCB3 option instead of Willem and also scrapping the jumper wire. So I did, and it works! I thought I would post this in case this something with newer burners or newer versions of the Willem software I tried it with the 097g & 097ja too. ja was kind of weird, so I'm gonna stick with version g. I HAVE NOT TRIED IT IN MY CAR YET, BUT WILL SOON... \
By the way, the "willem" settings seem to work as well, but you have to make sure which switches are on and which are off, because on screen is backwards than the actual board.
So far, so good.
I'm using a newer Willem dual burner and an AT29C256 chip.
After some playing around, I figured out that I had my jumper in the wrong place (3 & 30, not 3 & 31), duuuuh. When I changed it, it didn't make a bit of difference!!!
I checked the UD forums and someone suggested using the PCB3 option instead of Willem and also scrapping the jumper wire. So I did, and it works! I thought I would post this in case this something with newer burners or newer versions of the Willem software I tried it with the 097g & 097ja too. ja was kind of weird, so I'm gonna stick with version g. I HAVE NOT TRIED IT IN MY CAR YET, BUT WILL SOON... \
By the way, the "willem" settings seem to work as well, but you have to make sure which switches are on and which are off, because on screen is backwards than the actual board.
So far, so good.
#37
Re: willem (enhanced/dual power) burner how to! *56k/dsl=fucked!*
Originally Posted by Racintweek
AT29C256, i have 2 and tried both, same result
next week i'm going to get some sst27 chips from xenocron and see what happens with those
next week i'm going to get some sst27 chips from xenocron and see what happens with those
#39
Re: willem (enhanced/dual power) burner how to! *56k/dsl=fucked!*
Originally Posted by Racintweek
i followed this write up to the T. didnt work.
i did what 95redEX said about the PCB3 option and it worked. still no ID of the chip but it does everything else
i did what 95redEX said about the PCB3 option and it worked. still no ID of the chip but it does everything else