turbo edit/crome
#1
turbo edit/crome
ok well for starts, turbo edit has a function for one wire vtec. the question is it only the ps9's that can use this function and if not is a pr4 compatible. and the next question is, is there a el cheapo' way to convert to obd1 instead of buyin the conversion harness? just curious is all. im still gonna convert to obd1.
#2
Re: turbo edit/crome
You can make your own harness or just hardwire the new plugs in place of the old ones. The purpose of the harness is the simplicity and ability to reverse the mod instantly.
If you have some ability to solder the wiring diagrams are readily available for the conversion.
The harnesses are $104 at ------------- currently.
If you have some ability to solder the wiring diagrams are readily available for the conversion.
The harnesses are $104 at ------------- currently.
#3
Re: turbo edit/crome
Originally Posted by Cray91
You can make your own harness or just hardwire the new plugs in place of the old ones. The purpose of the harness is the simplicity and ability to reverse the mod instantly.
If you have some ability to solder the wiring diagrams are readily available for the conversion.
The harnesses are $104 at ------------- currently.
If you have some ability to solder the wiring diagrams are readily available for the conversion.
The harnesses are $104 at ------------- currently.
#5
Re: turbo edit/crome
kool, well i think the obd1 conversion harness from xenocron may just fit the bill. ive got plenty of time to decide what i want to do. as far as tuning options go though i would use crome even though ive messed with turboedit more than crome i think i can deal with it...last but not least ill have a little treat for all sooner or later.......
Thread
Thread Starter
Forum
Replies
Last Post
cynosurecivic
Engine Management
4
10-25-2003 10:01 PM