Stuck at step 40. MS-II V3.0
#1
Stuck at step 40. MS-II V3.0
I've reached step 40, but can't get any further. I'm assembling a MS-II V3.0 and everything has gone smooth so far. It has passed all tests to this point. I'm pretty sure my problem is a lack of PC knowledge.
The files I've downloaded so far are:
ms2dl200_setup
Monitor_v2.888a.abs
megasquirt-II.ini.2.8
When I install and run the first program. It says this:
For pre-Extra MS-II:
1) Short the "B/LD" jumper on the MS-II board.
2) Power cycle MS-II.
3) File->Open.
I am choosing a file on the desktop called "Monitor_v2.888a.abs". Then I get a box that says the following:
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Innovate Tuner/Desktop/Monitor_v2.888a.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db3e0
File read successfully.
Download failed:
Could not open comm port 1.
Exception caught: 2
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Innovate Tuner/Desktop/Monitor_v2.888a.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db3e0
File read successfully.
Download failed:
Could not open comm port 1.
Exception caught: 2
I've gone into device manager and there is one port that says "USB Serial Port (COM1)". In port settings I have the following settings:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Here's what's in front of me
Anybody know what's going on here?
The files I've downloaded so far are:
ms2dl200_setup
Monitor_v2.888a.abs
megasquirt-II.ini.2.8
When I install and run the first program. It says this:
For pre-Extra MS-II:
1) Short the "B/LD" jumper on the MS-II board.
2) Power cycle MS-II.
3) File->Open.
I am choosing a file on the desktop called "Monitor_v2.888a.abs". Then I get a box that says the following:
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Innovate Tuner/Desktop/Monitor_v2.888a.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db3e0
File read successfully.
Download failed:
Could not open comm port 1.
Exception caught: 2
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Innovate Tuner/Desktop/Monitor_v2.888a.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db3e0
File read successfully.
Download failed:
Could not open comm port 1.
Exception caught: 2
I've gone into device manager and there is one port that says "USB Serial Port (COM1)". In port settings I have the following settings:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Here's what's in front of me
Anybody know what's going on here?