Stuck at step 40. MS-II V3.0
I've reached step 40, but can't get any further. I'm assembling a MS-II V3.0 and everything has gone smooth so far. It has passed all tests to this point. I'm pretty sure my problem is a lack of PC knowledge.
The files I've downloaded so far are: ms2dl200_setup Monitor_v2.888a.abs megasquirt-II.ini.2.8 When I install and run the first program. It says this: For pre-Extra MS-II: 1) Short the "B/LD" jumper on the MS-II board. 2) Power cycle MS-II. 3) File->Open. I am choosing a file on the desktop called "Monitor_v2.888a.abs". Then I get a box that says the following: MegaSquirt Download 2.00 Reading C:/Documents and Settings/Innovate Tuner/Desktop/Monitor_v2.888a.abs.s19: Detected MS-II (HCS12) code. Entry point: 0x0000 Code range : 0x4000-0x3db3e0 File read successfully. Download failed: Could not open comm port 1. Exception caught: 2 MegaSquirt Download 2.00 Reading C:/Documents and Settings/Innovate Tuner/Desktop/Monitor_v2.888a.abs.s19: Detected MS-II (HCS12) code. Entry point: 0x0000 Code range : 0x4000-0x3db3e0 File read successfully. Download failed: Could not open comm port 1. Exception caught: 2 I've gone into device manager and there is one port that says "USB Serial Port (COM1)". In port settings I have the following settings: Bits per second: 115200 Data bits: 8 Parity: None Stop bits: 1 Flow control: None Here's what's in front of me http://i728.photobucket.com/albums/w...y/IMG_1048.jpg Anybody know what's going on here? |
Re: Stuck at step 40. MS-II V3.0
Serial to USB issues perhaps? What usb adapter is that?
|
Re: Stuck at step 40. MS-II V3.0
Everything came from diyauottune. It has to be something with the PC but I'm a retard when it comes to that stuff. :1
I own two Macs because they WORK! |
Re: Stuck at step 40. MS-II V3.0
get ms1 v2.2 instructions and go to your communications port ---- for windows it tells you how to look for the port with hyperterminal (start > progs > accys > entertainment > hyperterminal OMG HT)
|
Re: Stuck at step 40. MS-II V3.0
You need to configure your COM port correctly...
Bits per sec: 9600 Data bits: 8 Parity: none Stop bit: 1 Flow control: none |
Re: Stuck at step 40. MS-II V3.0
Originally Posted by sikdogg
You need to configure your COM port correctly...
Bits per sec: 9600 Data bits: 8 Parity: none Stop bit: 1 Flow control: none |
Re: Stuck at step 40. MS-II V3.0
Unless I missed something somewhere those settings are for MS-I. MS-II V3.0 uses 115200 bits per second.
|
Re: Stuck at step 40. MS-II V3.0
if you know the answer then go figure it out
|
Re: Stuck at step 40. MS-II V3.0
There goes dumbplex talking like he knows anything again
|
Re: Stuck at step 40. MS-II V3.0
Originally Posted by jagojon3
There goes dumbplex talking like he knows anything again
|
All times are GMT -5. The time now is 08:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands