i got my car to run but i have to hold the throttle open to keep it running and it smokes out the exhaust its runnig extremly rich enough to stall it out my settings are
throttle
lo hi
98% 99%
pressure sensor
in out
06 06
4 cyl arrow^ to the right
set
1-4k -40 for hi and lo settings
after 4k and up it richens to -35
my sensor check reads
in-1 2.785 to 2.790
in-2 0.060
throttle closed reads 0.185/0.190
0pen 4.320 to 4.330

im not sure what the ne settings should be but my are
NE 01 :1000 rpm
NE 02 :1600 rpm
NE 03 :2200 rpm

DEC. AIR
THR.****%
NE 1 10.0%
NE 2 10.0%
DISP. SCALE
PR. 760 mmhg
NE: 6000 rpm
CR : +3%


Im lost on the last settings from NE POINT down is this why the car wont run and I have my map signal wire to the white ecu wire with the red tracer for the signal ,is that correct?the set up is 90'crx si w/pg7 ecu safc II dohc zc motor
ihi rhb5 turbo
starion intercooler
msd 6 btm
1gen dsm b.o.v

thanks for the help

 

what injectors are you running?

 

damn i forgot to list injectors dsm 450s blue tops

 

How do you have it wired? Explain it EXACTLY how you have it. That doesn't sound right.....
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

wired like the apex instrutions said if i remember it was white afc wire to engine side of harness and yellow afc wire to ecu wire my question was asking if i tapped into the right wire