Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

SMC Install before injectors?

Old 06-22-2003, 11:36 PM
  #1  
1.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 1,183
Default SMC Install before injectors?

Ok. Well today I installed my o2 sim. I was wondering, can I install the smc before I put in the dsm 450's? Or will this cause problems?
BlinD is offline  
Old 06-23-2003, 07:34 AM
  #2  
1.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 1,183
Default Re:SMC Install before injectors?

Any answers?
BlinD is offline  
Old 06-23-2003, 10:02 AM
  #3  
0.5 BAR
 
Join Date: Dec 2002
Posts: 158
Default Re:SMC Install before injectors?

yes you can but you will not have enought gas.

But if you put all your setting to 0 % maybe it will run fine?

Somebody else can confirm this?
civic1990si is offline  
Old 06-23-2003, 05:37 PM
  #5  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:SMC Install before injectors?

Yeah, you'll have no problems if you keep the settings at 0%. I'm installing my AFC before the injectors and turbo, just to get it out of the way and learn how to use it.
tranceminister is offline  
Old 06-24-2003, 07:35 AM
  #6  
1.0 BAR
 
Join Date: Jan 2003
Posts: 209
Default Re:SMC Install before injectors?

does any one have any luck with the smc dual??just got one of those but haven't figured it out yet.
kine462 is offline  
Old 06-26-2003, 09:37 PM
  #7  
1.0 BAR
 
Join Date: Jan 2003
Posts: 209
Default Re:SMC Install before injectors?

i got my smc dual. i installed it and after ii figured out how to tune the damn thing it's sweet. i'm only running n/a right now untill i get enough money for a boost gauge so i can throw on my kit.i am still running stock injectors, couuld i run n/a with 450cc's untill i get turbo on
kine462 is offline  
Old 06-26-2003, 10:00 PM
  #8  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:SMC Install before injectors?

I don't think the SMC will lean it out enough for you to run 450's n/a.
tranceminister is offline  
Old 06-27-2003, 07:28 AM
  #9  
1.0 BAR
 
Join Date: Jan 2003
Posts: 209
Default Re:SMC Install before injectors?

it says it will give you decent idle, and you idle with 450cc's and little to no boost right? i'll just wait till i put my turbo kit on
kine462 is offline  
Old 07-20-2003, 12:20 AM
  #10  
1.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 1,183
Default Re:SMC Install before injectors?

Bringin this post back. Installed my smc, all the wires are fine. Idling at 1,500. And when I rev it, it drops rpms fast like normal until 2k then goes down slowly by 100rpm down to 1,500 idle. Its without the 450 injectors, and on a walbro 255 pump. Its seeming to run real rich at 0%. Is there anyway I can bring this idle down? It'll be a few days before im boosted.
BlinD is offline  

Thread Tools
Search this Thread
Quick Reply: SMC Install before injectors?


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.