SMC Install before injectors?
Ok. Well today I installed my o2 sim. I was wondering, can I install the smc before I put in the dsm 450's? Or will this cause problems? ???
|
Re:SMC Install before injectors?
Any answers? :(
|
Re:SMC Install before injectors?
yes you can but you will not have enought gas.
But if you put all your setting to 0 % maybe it will run fine? Somebody else can confirm this? |
Re:SMC Install before injectors?
yeah smc can be set to 0 correction meaning it'll run like whatever the injectors run.
|
Re:SMC Install before injectors?
Yeah, you'll have no problems if you keep the settings at 0%. I'm installing my AFC before the injectors and turbo, just to get it out of the way and learn how to use it.
|
Re:SMC Install before injectors?
does any one have any luck with the smc dual??just got one of those but haven't figured it out yet.
|
Re:SMC Install before injectors?
i got my smc dual. i installed it and after ii figured out how to tune the damn thing it's sweet. i'm only running n/a right now untill i get enough money for a boost gauge so i can throw on my kit.i am still running stock injectors, couuld i run n/a with 450cc's untill i get turbo on???
|
Re:SMC Install before injectors?
I don't think the SMC will lean it out enough for you to run 450's n/a.
|
Re:SMC Install before injectors?
it says it will give you decent idle, and you idle with 450cc's and little to no boost right? i'll just wait till i put my turbo kit on
|
Re:SMC Install before injectors?
Bringin this post back. Installed my smc, all the wires are fine. Idling at 1,500. And when I rev it, it drops rpms fast like normal until 2k then goes down slowly by 100rpm down to 1,500 idle. Its without the 450 injectors, and on a walbro 255 pump. Its seeming to run real rich at 0%. Is there anyway I can bring this idle down? It'll be a few days before im boosted.
|
All times are GMT -5. The time now is 04:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands