SAFC II /Running Rich problems
#1
SAFC II /Running Rich problems
I got a 90 CRX with ZC motor and a pm6 ecu.i have the car at the shop turboed with everything ready to go turbo,oil lines ect. i am using the SAFC II with 450cc injectors for fuel managment. my question is what should i do for settings because when i try to start the car when my setting are all zeroed out the car is dumping soo much fuel into the cylinders its getting pushed out the valves and liquid gas is pouring out my down pipe and kinda like hydo locking my motor is a way. when i installed my safc the first time with no turbo no injectors on it just the stock set up and the safc it ran rich as hell to, but it started and would flood out when u punched it.I thought if your setting were all set to 0% on high low throtal the safc did nothing am i wrong or maybe do i have a install problem i checked all my pre settings and i have all the right throtal voltage and everything. any help would be great thanks.
#2
Re:SAFC II /Running Rich problems
#4
Re:SAFC II /Running Rich problems
Still nothing working i got high and low throtal settings in but when crank it - it still dumps fuel all the way up and fills up the cylinders and like stops the motor from the pistions pushing luqid gas out my valves.... but for some reason the setting wont save i thought the SAFC II auto saved setting is their some way to make sure they get saved any help would be great guys thanks and i have read the FAQ a millions times thanks
Thread
Thread Starter
Forum
Replies
Last Post
Sniperpain
Forced Induction
10
09-20-2003 10:11 PM