Problems with Willem burner
Guest
Posts: n/a
Re: Problems with Willem burner
Originally Posted by 95RedEX
You should make your initial basemap and then saveas something else. That way you can reuse the StockGSR.bin again.
Originally Posted by fast2camciv
Originally Posted by jagojon3
Lol I figured out the jumper so I can erase now, but I still can't id the chip. What's up with that?
And if I try to program the chip after I erase it I get a "Error at 0x000000 Chip=0xFF buffer=0x7E"?
And if I try to program the chip after I erase it I get a "Error at 0x000000 Chip=0xFF buffer=0x7E"?
1.0 BAR
Joined: Oct 2004
Posts: 273
Re: Problems with Willem burner
https://www.homemadeturbo.com/forum/...threadid=35497
oh ---- bitchez
i use the willem, it takes a couple tries to figure it out but once you do it works perfect. worth the money saved definitely.
oh ---- bitchez
i use the willem, it takes a couple tries to figure it out but once you do it works perfect. worth the money saved definitely.
Guest
Posts: n/a
Re: Problems with Willem burner
Originally Posted by wdwalker
https://www.homemadeturbo.com/forum/...threadid=35497
oh ---- bitchez
i use the willem, it takes a couple tries to figure it out but once you do it works perfect. worth the money saved definitely.
oh ---- bitchez
i use the willem, it takes a couple tries to figure it out but once you do it works perfect. worth the money saved definitely.
And ****... I changed the offset to 8000 and it works fine, also seems to work fine now if I leave the offset at 0. What's the deal?
1.5 BAR
Joined: Jul 2003
Posts: 890
Re: Problems with Willem burner
My william burner is pissing me off too. it has been working flawlessly for the last year... and all of a sudden it just says, "write error" everytime i try to burn a chip. i was so ------- frustrated with it i was ready to put it on the concrete and stomp on it continuously. lucky i have a ostrich otherwise i would have been screwed.
3.0 BAR
Joined: Apr 2004
Posts: 9,779
Re: Problems with Willem burner
Originally Posted by jagojon3
Originally Posted by ****
if you leave the offset at 0 it will burn ok, but the chip will not work in your car.
SST27SF512. Using the Willem you have to set that offset. They will act like they're burning properly, but will not work once installed in the car.
Guest
Posts: n/a
Re: Problems with Willem burner
Originally Posted by ****
Originally Posted by jagojon3
Originally Posted by ****
if you leave the offset at 0 it will burn ok, but the chip will not work in your car.
SST27SF512. Using the Willem you have to set that offset. They will act like they're burning properly, but will not work once installed in the car.
[/quote
I believe you and am going to do it, just wondering where you found out you had to do that?
