PR3 to PM6-A09
#1
PR3 to PM6-A09
I have been looking to repin my harness to go from my pr3 to my pm6 to run NG55 and in my searches, I have found many diffrent pinouts for the PM6. What i would like if someone could is eather A)what pins do i move where, or B) a valid pinout for my pm6, I just dont know what one to use. I have found at least 3 diffrent versions of the pinout.
#2
#5
Re: PR3 to PM6-A09
Originally Posted by TurboEF9
Same as PM6.. really, they're the same except the VTEC ----, knock sensor, and secondary O2 of the PR3.
#6
#7
Re: PR3 to PM6-A09
What i have found so far...could someone doublecheck my work. I know some of them like the second O@ isnt a big deal, but others have me confused.
All the VTEC stuff can be disconnected
Is the ELD important, or is ti just going to throw an anoying CEL
What is a "Pressure Regulator Cut-Off Solenoid Valve"
on pin B1 and B9 what do i do about he hazard and break switch
pin B11 will i loose my read defrost....why is there even a pin on the ECU for this
in pin C9 just 2 names for the smae thing(i have run into that alot)
What do i do about the radiator fan relay
PM6 --> PR3
A8 Lock-up Control Solenoid Valve --> Spool (VTEC) Solenoid Valve
A10 EGR Valve (HF Only) --> Pressure Regulator Cut-Off Solenoid Valve
B1 Nothing --> Hazard Fuse w/Brake Switch
B3 Fast Idle Valve --> A/C Clutch Relay
B4 Radiator Fan Relay --> Nothing
B5 Alternator --> Oil Pressure Switch
B7 A/C Switch w/B8 --> Nothing
B9 Nothing --> Brake Switch
B11 Clutch Switch (HF Only) --> Rear Defogger Switch
B19 ELD --> Knock Sensor
C8 Nothing --> O2 Sensor B
C9 PA Sensor --> P/S oil switch
Any help would be nice
All the VTEC stuff can be disconnected
Is the ELD important, or is ti just going to throw an anoying CEL
What is a "Pressure Regulator Cut-Off Solenoid Valve"
on pin B1 and B9 what do i do about he hazard and break switch
pin B11 will i loose my read defrost....why is there even a pin on the ECU for this
in pin C9 just 2 names for the smae thing(i have run into that alot)
What do i do about the radiator fan relay
PM6 --> PR3
A8 Lock-up Control Solenoid Valve --> Spool (VTEC) Solenoid Valve
A10 EGR Valve (HF Only) --> Pressure Regulator Cut-Off Solenoid Valve
B1 Nothing --> Hazard Fuse w/Brake Switch
B3 Fast Idle Valve --> A/C Clutch Relay
B4 Radiator Fan Relay --> Nothing
B5 Alternator --> Oil Pressure Switch
B7 A/C Switch w/B8 --> Nothing
B9 Nothing --> Brake Switch
B11 Clutch Switch (HF Only) --> Rear Defogger Switch
B19 ELD --> Knock Sensor
C8 Nothing --> O2 Sensor B
C9 PA Sensor --> P/S oil switch
Any help would be nice
#8
Re: PR3 to PM6-A09
Originally Posted by warrick
Thread
Thread Starter
Forum
Replies
Last Post