ok to use p06 bin for d16y7?
#1
ok to use p06 bin for d16y7?
I'm using crome here next week to tune my Y7 at about 7psi.
Just wondering, there seems to be a lack of d16y7 bins out there, I couldn't find one in the rom directory on pgmfi.
The only thing I found was one that used the three wire iacv still and that wouldn't work for me.
So what I'm wondering is if I can just use a p06 map and tune it from there? I know I can get my AFR's fairly accurate with my wideband, but I'm worried about the timing.
Is the p06 timing significantly different than the y7 timing?
Does the y7 share the same lame *** cam gear as the y8 and therefore require all that ---- with the y8 timing? (21.75 with dizzy at 12 etc..)
any input on y7 timing tuning would be great. I plan on making some det cans and going from there... but I would like a good timing basemap to start out with.
Just wondering, there seems to be a lack of d16y7 bins out there, I couldn't find one in the rom directory on pgmfi.
The only thing I found was one that used the three wire iacv still and that wouldn't work for me.
So what I'm wondering is if I can just use a p06 map and tune it from there? I know I can get my AFR's fairly accurate with my wideband, but I'm worried about the timing.
Is the p06 timing significantly different than the y7 timing?
Does the y7 share the same lame *** cam gear as the y8 and therefore require all that ---- with the y8 timing? (21.75 with dizzy at 12 etc..)
any input on y7 timing tuning would be great. I plan on making some det cans and going from there... but I would like a good timing basemap to start out with.
Thread
Thread Starter
Forum
Replies
Last Post
akurtzer57
Engine Management
3
03-13-2009 07:11 PM
95civicLX
Hybrid/Tech
2
10-25-2005 07:50 PM
scottsi
Engine Management
4
08-19-2005 08:16 AM
sporkcrx
Engine Management
16
03-29-2005 12:29 PM
biggmike
Engine Management
4
04-15-2004 02:43 AM