Im in the works of making a few of these from the leftover obd2 ecus i had layin around, and as im matching up the pin outs with one that was laying around there are added wires to the obd1 plugs, one in each of the three.....

Where can i get the little metal pin to incert it in to the pin spot so i can add the wire for the obd 1 plugs?

 

most people ruin a set of pigtails cut from a jy car and pull the pins with a tiny screw driver

Or they invest a large sum of money to achieve the minimum order from the factory and sell assembled units (xenocron)

I have a few sets of pigtails I was cutting up but it might have gotten lost in storage, your best bet is to go cut a set from the local jy. most you pull it's won't really charge for that ---- if you're buying something else. If that's all you need the local place charges $10 a plug so an ecu plug is $30

 

lol, yea i thought about stealing them from a junk plug, but was wondering if i could buy them at radioshak o something...

Looks like a trip to the junkyrd is needed

 

removing the pins? i dont damage the pins or the plugs.i use a thumb tack.

 

thanks for the tip, wasnt sure how i was going to get them out but that seems like it will work..