OBD2 O2 SENSORS WITH SAFC
04-22-2003, 11:11 PM
#1
3.0 BAR
Thread Starter
Join Date: Feb 2003
Posts: 1,625
OBD2 O2 SENSORS WITH SAFC
my buddy has a 97 integra that hes going to be running an -afc on with blue tops. the question is, does the AFC need to read both O2 sensors or can it work with just one? and if it can work on just one, can u remove the second one completly?
Brett
Brett
04-22-2003, 11:28 PM
#2
1.0 BAR
Join Date: Apr 2003
Posts: 218
Re:OBD2 O2 SENSORS WITH SAFC
nice post brett i wold really benifit from this knowledge myself although i think i have other problems too with the obd2. Apparently a BTM is not a good option for timing retard and chipping the ECU is the answer but i am not sure chipping an OBD2 is possible or affordable.
04-22-2003, 11:34 PM
#3
3.0 BAR
Thread Starter
Join Date: Feb 2003
Posts: 1,625
Re:OBD2 O2 SENSORS WITH SAFC
this is why i dont deal with all this emsissions control ----. both my hondas are obd0 so they are easy as hell to tune. but if anyone has any idea on how to wire up an s-afc on an obd2 integra LS my buddy brian (and the last mohican) would be very grateful) thanks guys
Brett
Brett
04-23-2003, 02:42 PM
#4
0.5 BAR
Join Date: Dec 2002
Posts: 55
Re: apex s-afc doesnt hook to the o2 sensor at all.
my aapex s-afc doesnt hook to the o2 sensor at all. it uses map voltage tps signal and rpm signal to control and reduce the map signal for the ecu. has nothing to do with the o2 sensors so you should be fine
Thread
Thread Starter
Forum
Replies
Last Post
projekteg
Hybrid/Tech
13
01-17-2006 10:14 AM
96ekhatch
Forced Induction
1
05-25-2004 05:47 PM
