Paul99EX

ok. I was thinkin, since im gettin dash lights, CEL and SRS light comin on, the harness HAS to be making a connection to the ECU. So im kinda leaning toward the ECU being the problem, cuz if it was the harness, i wouldnt have any contact with the ecu, so the dash would have nothing come on.

Chris Harris

You sure you have all of the Harness and ECU plugs pushed all the way in?

I've done that before personally on a customers car and then walked around in circles for damn near a half hour before I realized I didnt click everything down good and proper.

Did you try taking the chip out and cutting J1 to see if everything would prime correctly?

Paul99EX

when it cranks, oil is going through, its winding, i can hear compression, just no start up. The dash lights are coming on, everything seems to be normal, but it just ownt go that final inch to start. we check the plug wires for sparnk, none, i check the injectors, theyre not clicking on...

Chris Harris

Did you put in a resistor box?

Paul99EX

yeah,the 10ohm resistors on the injectors. with obd1 injectos clips