need some help hooking up safc2
10-02-2007, 02:57 AM
#1
0.0 BAR
Thread Starter
Join Date: Oct 2007
Posts: 3
need some help hooking up safc2
ok got a 1986 crx si and got a safc2 for tuning but cant find installation instructions anywhere searched for days maybe i looking for the wrong stuff but anyway any help will be awesome
10-02-2007, 08:24 PM
#5
0.0 BAR
Thread Starter
Join Date: Oct 2007
Posts: 3
Re: need some help hooking up safc2
ok sorry i didnt read anything in the read before post sec. that pertained to me and sorry its an 86 crx si ew4 motor with a t3 turbo and 450cc injectors and ive searched the apexi site and they dont have any info that i could find on my car or anything close to my car
10-03-2007, 09:12 PM
#7
1.0 BAR
Join Date: Feb 2007
Location: Floresville Tx
Posts: 236
Re: need some help hooking up safc2
Red-should go directly to ground.
Green-alternator pwr wire
purple- ground
gray-steering wheel horn ground
brown- flasher fluid level sensor
black- antenna wire
yellow-to any other yellow wire on the car you find
white- put a 10 ohm resistor and hook directly to coil + side
With this set up you should get to run a cool 14 psi
your welcome :1
Green-alternator pwr wire
purple- ground
gray-steering wheel horn ground
brown- flasher fluid level sensor
black- antenna wire
yellow-to any other yellow wire on the car you find
white- put a 10 ohm resistor and hook directly to coil + side
With this set up you should get to run a cool 14 psi
your welcome :1
Thread
Thread Starter
Forum
Replies
Last Post
