need some help hooking up safc2
 

ok got a 1986 crx si and got a safc2 for tuning but cant find installation instructions anywhere searched for days maybe i looking for the wrong stuff but anyway any help will be awesome

Re: need some help hooking up safc2
 

what the ---- are you tunning ?? what your setup ? and try the ------- top of this page moron, it says read here before making a post, obviously what you didnt ------- do.. TOOL
P

Re: need some help hooking up safc2
 

good 1st post newb ;)

Re: need some help hooking up safc2
 

not only that... the instructions you are searching for are FREE to download of APEX-i's website :1

Re: need some help hooking up safc2
 

ok sorry i didnt read anything in the read before post sec. that pertained to me and sorry its an 86 crx si ew4 motor with a t3 turbo and 450cc injectors and ive searched the apexi site and they dont have any info that i could find on my car or anything close to my car

Re: need some help hooking up safc2
 

Re: need some help hooking up safc2
 

Red-should go directly to ground.
Green-alternator pwr wire
purple- ground
gray-steering wheel horn ground
brown- flasher fluid level sensor
black- antenna wire
yellow-to any other yellow wire on the car you find
white- put a 10 ohm resistor and hook directly to coil + side

With this set up you should get to run a cool 14 psi

your welcome :1

Re: need some help hooking up safc2
 

^^+1

R

Re: need some help hooking up safc2