My willem died
05-06-2005, 08:56 PM
#1
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
My willem died
I think my burner just died on me.
I burned an SST chip, went outside to test it.
Came back to erase and re-burn, the red light thats normally on was off and I got a hardware failure.
rebooted a couple times just to make sure it wasnt something the computer tripped out about.
tried unplugging and re-plugging stuff, only got the red light to come on dimly for a couple moments, green light has stayed off entire time.
no noticeable burnt spots on the board, everything looks okay.
any idea?
I burned an SST chip, went outside to test it.
Came back to erase and re-burn, the red light thats normally on was off and I got a hardware failure.
rebooted a couple times just to make sure it wasnt something the computer tripped out about.
tried unplugging and re-plugging stuff, only got the red light to come on dimly for a couple moments, green light has stayed off entire time.
no noticeable burnt spots on the board, everything looks okay.
any idea?
05-07-2005, 04:37 PM
#3
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: My willem died
zapped it just sittin here on my desk, kinda hard to believe, but anythings possible.
FALSE ALARM
workin fine now, chip was in backwards. gave it symptoms like there wasnt any hardware present at all.
FALSE ALARM
workin fine now, chip was in backwards. gave it symptoms like there wasnt any hardware present at all.
Thread
Thread Starter
Forum
Replies
Last Post
