|
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
Originally Posted by Joseph Davis
MADMAX, I've been stuffing Motorola 2.5 bar into OBD1/2 enclosures for a while now. Thanks for ruining my #1 method of taking money from high dollar riceboys at the streetraces - previously, they thought I was running a stock MAP "and could only be making xxx whp."
Well, it was a nice thing while it lasted. :'( |
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
Originally Posted by Joseph Davis
MADMAX, I've been stuffing Motorola 2.5 bar into OBD1/2 enclosures for a while now. Thanks for ruining my #1 method of taking money from high dollar riceboys at the streetraces - previously, they thought I was running a stock MAP "and could only be making xxx whp."
Well, it was a nice thing while it lasted. :'( |
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
Ass!
|
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
Originally Posted by HiProfile
I think you're still safe though. Rice boys usually get sniffed out & exiled from this sight rather quickly. Well, most do. You're still here >:D
|
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
400 of the boards you saw pictured in xenocron's post above will be here in the first week of march, depending on shipping times. Final pricing has not been finalized on kits, but bare boards (i.e. you supply the MAP sensor, wiring/connector, optional 0603 capacitors, recomended waterproof epoxy, etc.) should be around $10 including domestic US shipping.
Chris or I will keep everyone updated as we finalize details. ;D |
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
Originally Posted by RENR
so it just sits in there "free floating"? or is it glued down to something? what settings do you select in crome for the 4 bar? i dont see it listed
Sorry Rene, I've been away this past week. It's not free-floating. The inside is filled up with plastic epoxy. |
Re: 2.5 BAR and 3 BAR MAP Sensor Mods (56k....thumbnails)
Originally Posted by moak89
nicee.
if we install that 3bar then what values are we suppose to use in crome? :S
Originally Posted by HiProfile
You have to use Boost Tools to select custom sensor, then input the values. IIRC the 4bar is 200 to 4000 mbar, the 3bar is 200 to 3040 mbar, etc. Then you have to move the columns around & retune a bit, or at least I haven't played around enough to have it do it for me.
|
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
well i set the min to 200 and the max to 3040. but crome is giving me some kind of script error :S
??? |
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
you guys need to learn how to read datasheets and do math. RTFM FTW!!!
|
Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
Won't the data sheet tell you the voltage slope ?
|
| All times are GMT -5. The time now is 10:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands