Re: Fitting the motorola map sensor into your stock map sensor housing
 

Dave clickin the wrong buttons lol

Re: Fitting the motorola map sensor into your stock map sensor housing
 

me clicking the wrong buttons and then the forum went down...

Re: Fitting the motorola map sensor into your stock map sensor housing
 

I wont be past the 28psi on my car anytime soon, but Beau will be close enough.

There's always something special about pegging the last column on a 3bar :)

Re: Fitting the motorola map sensor into your stock map sensor housing
 

Beau doesnt need anymore boost... he breaks enough ---- at his current boost/power level :-X

Re: 2.5 BAR and 4 BAR MAP Sensor Mods (56k....thumbnails)
 

dave your gonna love this ---- in my car lol

Re: Fitting the motorola map sensor into your stock map sensor housing
 

Nice work MIke and Web. YOu guys produce quality ----!

:thmubs up: from me!

Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
 

Well the Motorola 2.5 bar works great. We got done with a street tune tonight.
Dropped down to stock wg spring (10psi) and worked up slowly to 18 psi.
The boost controller is still working perfect. Holds the set psi straight across with no spikes.
Gotta jump on the dyno soon and get it to the track.

Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
 

ya right i want to see that happen :P

Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
 

hott damn this is a nice thread ;)

-Luke

Re: Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
 

I'm suprised that nobody else really caught on when I mentioned the 3/4 and 7 bar map sensors in that 'other' locked thread. I was going to get a set for free before they caught on, just haven't bought any yet. These should be a very nice, as well as cheap, alternative to the GM map sensors, since the motorola/freescale sensors don't have a goofy vacuum issue. Kinda useless if you don't boost over 22psi, since you can sell your oem sensor for ~$15-20 on ebay.

THe one thing I'd suggest is a better way to put that little thing in the OEM map sensor. After digging to get the wires, the port on that thing can be glued to the where the tiny o-ring is inside the oem sensor case. Its the same size then, and you won't have to worry about any hose poping off a nipple, and can make it look exactly like stock. BTW the alternative to that adapter would be a plate the same thickness as a very common source of 1/8" aluminum - road signs! Buy a 1/8" NPT tap for $5-10 and you've got a nice plate to put a barbed fitting.