Map cel during boost Prob.

Reply Subscribe

Thread Tools

Search this Thread

Sep 6, 2003 | 05:19 PM

Ghetto88ZC

Thread Starter

0.5 BAR

Joined: Apr 2003

Posts: 87

Map cel during boost Prob.

I have a zc with 8 lbs goin to it and i keep getting map cels. I have 450ccs and an smc 500. My settings are:

1000 38%
2000 38%
3000 38%
4000 37%
5000 37%
6000 36%
7200 36%

When at WOT i throw a map cel at 6000 at 8 pounds. It seems to be running rich as ---- by the looks of the plugs. What should i do. WHy does the map cel keep on coming on with such low boost with the smc?

Later Pete,

Sep 6, 2003 | 06:01 PM

turboboy

Guest

Posts: n/a

Re:Map cel during boost Prob.

you need to set the map voltage clamp with a voltmeter...look in the smc instructions

Sep 6, 2003 | 09:07 PM

d16forlife

3.0 BAR

Joined: Jun 2003

Posts: 6,843

Re:Map cel during boost Prob.

So you dont need a missing link with an AFC?

Sep 7, 2003 | 04:05 PM

turboboy

Guest

Posts: n/a

Re:Map cel during boost Prob.

hes using an smc not an afc...which i dont know jack ---- about, but ill say no

Sep 7, 2003 | 07:56 PM

BlinD

1.5 BAR

Joined: Jan 2003

Posts: 1,183

Re:Map cel during boost Prob.

SMC is about the same ----. Check your voltage clamp. Then CHECK YOUR WIRING. This was my biggest flaw. Make sure all wires are connected and have a secure connection. And DONT USE WIRE TAPS. Strip the wire and solder it on. Those taps fucked me all up.