What would be the best injectors you can use on a B18B 95 ls. and when you wanna go turbo, would work as well.

 

I thought this was common knowledge? DSM 450cc injectors are the most popular. Plenty of fuel.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

Yes your right. But, i'm running NA i don't need dsm 450cc i'll run to rich and boggle out. i need something for meanwhile on NA that i can increase on performance and maybe still help out while going forced induction.

 

You can run 450cc N/A. You would just turn it down. I doubt it would be too rich at -50 at 6000+ rpm. Other than that I don't know what to tell you. That's kinda like asking which header to buy that would work for a turbo down the road. :P J/K.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

plus its the most affordable at 40-75$ plus another 40 or so for cleaning/balancing.

 

https://www.homemadeturbo.com/forum/...;threadid=4972
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

just go buy the 450's and keep your OEM injectors until you go Forced Ind.

 

keep your stock injectors
you dont need anything bigger until you boost. and when you boost, put the 450 DSM injectors in.

 

If you run a puny regular old .50 trim T3, one of the 15G or 14B mitsu turbos, T25, etc, then DSM 450cc are fine for an LS.

If you run anything approaching an efficient compressor... T3/4 hybrid for example... then you're going to max out the 450cc at about 230 whp, which is past 8psi or 5500 rpms on a properly tuned LS. If you plan on making POWER, then just go ahead and hit up some RX7 guys for 550cc injectors.