Re:HELP! car wont start....soild CEL?
 

I'm now experiancing the same thing, but only with a burned chip, i tried the stock map, and my tuned map and it still does it, it's like the main relay keeps clickin on/off very quickly. But if i put in my stock chip it works fine, any ideas?

Re:HELP! car wont start....soild CEL?
 

..what codebase are you using?

Re:HELP! car wont start....soild CEL?
 

I followed the Turboedit directions to a t..I tried using the stock pr4 and importing the stable.
It can't be the ecu or my soldering, as the stock ic works fine, and there arent' any errors when programming the chip now..So i'm lost..

Re:HELP! car wont start....soild CEL?
 

..you tried to import the stable rom to the stock PR4 ROM, or the stock PR4 ROM into the stable?

PR4 could have a checksum issue. Make sure you're using the latest version (of the GUI).

Re:HELP! car wont start....soild CEL?
 

I emailed you my basemap and my first tuned map, can u take a look and see if everything looks ok?

Re:HELP! car wont start....soild CEL?
 

Could it be anything to do with the fact that the Ecu/car is Canadian. A friend of mine said it may be something to do with our lack of ELD?

Btw, here is my base map, it's a Stock map imported into the stable..With the 114 fuel correction, 450cc's and step boost retard..

http://www.accesswave.ca/~slavoie/Basetuned.bin