HELP! car wont start....soild CEL?
im running turboedit try 11 ng26 map that is modified to my liking.... not sure if this is related to engine management.
i got what looks to be a soild CEL, though the light may be blinkin super fast (its 2am im tired) and what sounds to be the fuel pump/main relay clicking very fast for as long as the key is on "ON"...didnt try to start it... i reburnt my ROM, no luck. swapped my PR4 from my other car (PS9 in the car that wont start) same ----... |
Re:HELP! car wont start....soild CEL?
Try an older version yo. Try10 or ???
|
Re:HELP! car wont start....soild CEL?
sounds like a bad chip
|
Re:HELP! car wont start....soild CEL?
NG26 has no checksum... it won't solid CEL because of code.
Something is physically wrong. I.E, burn didn't take, chip is bad, put the chip in backwards (heheheh), maybe a leg didn't hit the socket right? |
Re:HELP! car wont start....soild CEL?
Originally Posted by leed
Try an older version yo. Try10 or ???
i tried another chip, tried another.... :-\ |
Re:HELP! car wont start....soild CEL?
Try disabling VTEC and see if it works.
...if enabling it breaks it, then you need to get ahold of Dave. He says he ran it fine. |
Re:HELP! car wont start....soild CEL?
well it ran fine on the other car...
|
Re:HELP! car wont start....soild CEL?
well im retarded, it was the ground on the thermostat....only finger tight so it wasnt making a desent connection :-[
|
Re:HELP! car wont start....soild CEL?
HAhaha.. slow down, look everything over... and stop blaming TE. :P BWHAHAHAH! ;D
Good luck today! |
Re:HELP! car wont start....soild CEL?
im not blaming TE.... i LOVE TE :-*
just pointing out that im using it...gotta give all the info ya'know... |
Re:HELP! car wont start....soild CEL?
I'm now experiancing the same thing, but only with a burned chip, i tried the stock map, and my tuned map and it still does it, it's like the main relay keeps clickin on/off very quickly. But if i put in my stock chip it works fine, any ideas?
|
Re:HELP! car wont start....soild CEL?
..what codebase are you using?
|
Re:HELP! car wont start....soild CEL?
I followed the Turboedit directions to a t..I tried using the stock pr4 and importing the stable.
It can't be the ecu or my soldering, as the stock ic works fine, and there arent' any errors when programming the chip now..So i'm lost.. |
Re:HELP! car wont start....soild CEL?
Originally Posted by Smokey
I tried using the stock pr4 and importing the stable.
PR4 could have a checksum issue. Make sure you're using the latest version (of the GUI). |
Re:HELP! car wont start....soild CEL?
I emailed you my basemap and my first tuned map, can u take a look and see if everything looks ok?
|
Re:HELP! car wont start....soild CEL?
Could it be anything to do with the fact that the Ecu/car is Canadian. A friend of mine said it may be something to do with our lack of ELD?
Btw, here is my base map, it's a Stock map imported into the stable..With the 114 fuel correction, 450cc's and step boost retard.. http://www.accesswave.ca/~slavoie/Basetuned.bin |
All times are GMT -5. The time now is 01:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands