HELP! car wont start....soild CEL?
 

im running turboedit try 11 ng26 map that is modified to my liking.... not sure if this is related to engine management.

i got what looks to be a soild CEL, though the light may be blinkin super fast (its 2am im tired) and what sounds to be the fuel pump/main relay clicking very fast for as long as the key is on "ON"...didnt try to start it...

i reburnt my ROM, no luck. swapped my PR4 from my other car (PS9 in the car that wont start) same ----...

Re:HELP! car wont start....soild CEL?
 

Try an older version yo. Try10 or ???

Re:HELP! car wont start....soild CEL?
 

sounds like a bad chip

Re:HELP! car wont start....soild CEL?
 

NG26 has no checksum... it won't solid CEL because of code.

Something is physically wrong. I.E, burn didn't take, chip is bad, put the chip in backwards (heheheh), maybe a leg didn't hit the socket right?

Re:HELP! car wont start....soild CEL?
 

cant, need vtec yo....

i tried another chip, tried another.... :-\

Re:HELP! car wont start....soild CEL?
 

Try disabling VTEC and see if it works.

...if enabling it breaks it, then you need to get ahold of Dave. He says he ran it fine.

Re:HELP! car wont start....soild CEL?
 

well it ran fine on the other car...

Re:HELP! car wont start....soild CEL?
 

well im retarded, it was the ground on the thermostat....only finger tight so it wasnt making a desent connection :-[

Re:HELP! car wont start....soild CEL?
 

HAhaha.. slow down, look everything over... and stop blaming TE. :P BWHAHAHAH! ;D


Good luck today!

Re:HELP! car wont start....soild CEL?
 

im not blaming TE.... i LOVE TE :-*

just pointing out that im using it...gotta give all the info ya'know...