96BoostLude

HI i have a h22 with 16g turbo 6-7 psi, but for some reason it doesn't feel that fast and a little stall when boost kick in than at 2 psi it start pick up ? It feels more like a supercharge not a turbo. Any help. THANX
SETUP:
dsm 450cc
fpr 50 psi
6-7 psi
Safc2:1000:-11
1600:-9
2200:-8
2800:-7
3400:-6
4000:-5
4600:-4
5200:-3
5800:-3
6400:-3
7000:-3
8000:-2

RENR

maybe your running just a tad bit rich? try -36 across the scale...

does your car even idle at those settings?

chevy

holy ----.. thats rich try starting out at -38 and work form there

88dx

Im no Engine Management expert but wouldnt -36 be too lean since H22's come with 345's stock ?

z3r0cfm

yup shouldn't you start off at around -28 to -35 for it?

450cc - 345 cc
--------------
450cc

should give you the ratio needed to have it running correctly, then adjust from there

93JuicedAcclude

ok i'm a engine management noob. and i also have a h22 that's getting boost this weekend. what fuel pressure should i bump it up to??. it's at 36-38psi right now. i want to run it rich as hell. because i have about an hour drive before i can get to my local dyno to check the A/F. i just don't want to blow my motor up on the way down hehe

warric_k

set your fuel pressure to stock.

use the formula above.

if you're terribly scared, just hit -25 all the way across, and don't boost.