Part out-90dx hatch, turbos!, gauge, eg h22 mounts, h22 tb, more items added!
10-01-2007, 01:15 PM
#1
0.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 0
Part out-90dx hatch, turbos!, gauge, eg h22 mounts, h22 tb, more items added!
Like the title says, I have a pretty much complete dx hatch that I have no title for-- I got it in trade for a set of lowering springs from a guy that was going to use it for a circle track race car. The car lacks a head and radiator, but interior is complete, exterior is pretty dinged up on passenger side. Hood is useable with small dents, driver side fender is pretty good. All glass is there, driver side seat slightly worn, pass. seat is good. JD has dibs on the front seat belt recievers. Other than that, tell me what you need, everything is obo, and don't be a lowballin lil bitch. I'm poorer than you. PICS NOGS. Oh and for the large items (ex hood, seats) I would prefer pickup unless you really want to pay for some crazy freight shipping. Located 40min south of Buffalo, NY. zip is 14034 and my paypal is narfer@addlebrain.com
NEW: I'm poor so I've decided I'll sell my other two turbos. I have a garrett t3 42/63 and a garrett t3 60/48. Both have some shaft play but should be good to go. No pics yet, and if no one buys them on the quickness, I'm going to make a 60/63 and a 42/48 and make more money.
Also have a pretty complete d15b8, and two extra d15 distributors, one obd1 and one obd0, along with a d15 obdi intake mani and a separate fuel rail
As you can see in pics, also have a full gasket kit ($40 shipped) for a d series engine which is opened but should be complete, and a z6 timing belt ($30 shipped) from carquest.
b&m fuel pressure riser (pretty sure its for d series, bolt pattern didn't fit my b) $30 shipped
Autometer a/f ratio gauge (ricer narrowband) dent in face thing, don't know how it happened, but that ring is replaceable if you're concernicus about it. $25 shipped
92-95 civic h22/h23 mounts-- ebay ones, of solid construction, never used $80 shipped
h22 throttlebody-- good condition but broken tps sensor--pretty sure any d/b tps should work
$40 shipped
IHI rhb5 turbo off of a probe. has a t3 flange welded to the hot side by simplex for easy of use. Clean, very little side-side play, no in or out play, overall healthy, if tiny, turbo $55 shipped
HUGE garrett turbo off of a diesel cat. In really good condition if a little ugly, but whats nice is that the hot side is not disproportionately large compared to the cold side, so it should be a pretty good turbo for a larger engine such as a single turbo v6 or v8 project. I need to look again but I don't think there are any helpful numbers on it (such as a/r) $150 shipped
NEW: I'm poor so I've decided I'll sell my other two turbos. I have a garrett t3 42/63 and a garrett t3 60/48. Both have some shaft play but should be good to go. No pics yet, and if no one buys them on the quickness, I'm going to make a 60/63 and a 42/48 and make more money.
Also have a pretty complete d15b8, and two extra d15 distributors, one obd1 and one obd0, along with a d15 obdi intake mani and a separate fuel rail
As you can see in pics, also have a full gasket kit ($40 shipped) for a d series engine which is opened but should be complete, and a z6 timing belt ($30 shipped) from carquest.
b&m fuel pressure riser (pretty sure its for d series, bolt pattern didn't fit my b) $30 shipped
Autometer a/f ratio gauge (ricer narrowband) dent in face thing, don't know how it happened, but that ring is replaceable if you're concernicus about it. $25 shipped
92-95 civic h22/h23 mounts-- ebay ones, of solid construction, never used $80 shipped
h22 throttlebody-- good condition but broken tps sensor--pretty sure any d/b tps should work
$40 shipped
IHI rhb5 turbo off of a probe. has a t3 flange welded to the hot side by simplex for easy of use. Clean, very little side-side play, no in or out play, overall healthy, if tiny, turbo $55 shipped
HUGE garrett turbo off of a diesel cat. In really good condition if a little ugly, but whats nice is that the hot side is not disproportionately large compared to the cold side, so it should be a pretty good turbo for a larger engine such as a single turbo v6 or v8 project. I need to look again but I don't think there are any helpful numbers on it (such as a/r) $150 shipped
10-02-2007, 12:05 PM
#9
0.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 0
Re: Part out-90dx hatch, turbo, gauge, eg h22 mounts, h22 tb, ***** enlarger
Originally Posted by 89shithatch
i have a title and matching dash ill sell you
10-02-2007, 12:11 PM
#10
0.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 0
Re: Part out-90dx hatch, turbo, gauge, eg h22 mounts, h22 tb, ***** enlarger
everything obo to my HMT brethren...
corner lights... $20 shipped
mounts $80 shipped
$40 shipped
I'll have to check the size and weight on that bitch, make me a reasonable offer
How much for the front bumper support shipped to 10461.
Thanks.
Originally Posted by ososlohatch
how much for the corner lights off the hatch?
and how much for the eg h22/23 mounts ??
and how much for the eg h22/23 mounts ??
mounts $80 shipped
Originally Posted by SDRAWKCAB
how much for the h22 TB shipped to FL 32129?
Originally Posted by D16Y8-Z6
I'll have to check the size and weight on that bitch, make me a reasonable offer
How much for the front bumper support shipped to 10461.
Thanks.
