Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Engine Management
Going to run Turbo edit...need a good Chip burned .. >

Going to run Turbo edit...need a good Chip burned ..

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Going to run Turbo edit...need a good Chip burned ..

Old 08-23-2004, 12:20 PM
  #1  
3.0 BAR
Thread Starter
 
Join Date: May 2003
Posts: 5,381
Default Going to run Turbo edit...need a good Chip burned ..

Like it say on the title, i need to get a chip burned for my PM6. Im running a DOHC ZC with 390 Dsm injectorS AND a t bird turbo at 5 psi right now. Who can hook a nukka up with a good decent burned chip? donald125 is hooking it up with installing the Zif but we both are unsure on how to play with TE. if anyone can send me a TE bin or know of a link where we can get a good Bin then that would also work. we have a burner so i guess all we need is a decent TE bin so we can get my 4 door going...

thanks in advance

julio
juli0_bustamante is offline  
Old 08-24-2004, 08:01 PM
  #2  
con
0.0 BAR
 
Join Date: Nov 2003
Posts: 0
Default Re:Going to run Turbo edit...need a good Chip burned ..

Get a hold of xenocron he did a base program for me. He's great to deal with and had mine done in no time
con is offline  
Old 08-24-2004, 08:10 PM
  #3  
3.0 BAR
Thread Starter
 
Join Date: May 2003
Posts: 5,381
Default Re:Going to run Turbo edit...need a good Chip burned ..

WOW XENOCRON!! you seem to be da man ..i have been recommended by you so much ...well let me know if you can get that stuff for me...pm me when you get a chance

julio

and thanks highroller!!!
juli0_bustamante is offline  
Old 08-24-2004, 08:25 PM
  #4  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re:Going to run Turbo edit...need a good Chip burned ..

PMd you back...I never knew I had all these people out there that keep recommending me...it's kinda neat
Chris Harris is offline  
Old 08-24-2004, 08:43 PM
  #5  
3.0 BAR
 
Join Date: Mar 2003
Posts: 21,494
Default Re:Going to run Turbo edit...need a good Chip burned ..

You're the TurboEdit ----- around here.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Dr.Boost is offline  
Old 08-24-2004, 10:01 PM
  #6  
1.0 BAR
 
Join Date: Jul 2004
Posts: 524
Default Re:Going to run Turbo edit...need a good Chip burned ..

xenocron, i know you stay pretty busy but if you could assist me some with a basemap it would be greatly appreciated! may be fairly close to julios, its a d15b2 with pm6 ecu, mpfi etc..
green91 is offline  
Old 08-25-2004, 12:56 AM
  #7  
3.0 BAR
Thread Starter
 
Join Date: May 2003
Posts: 5,381
Default Re:Going to run Turbo edit...need a good Chip burned ..

hey!!! get int line....:P

hey let me know when you get those maps done.
juli0_bustamante is offline  
Old 08-25-2004, 10:20 AM
  #8  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re:Going to run Turbo edit...need a good Chip burned ..

Originally Posted by green91
xenocron, i know you stay pretty busy but if you could assist me some with a basemap it would be greatly appreciated! may be fairly close to julios, its a d15b2 with pm6 ecu, mpfi etc..
I would say start small, use the NG28 code and use my BASEMAP write-up that I wrote to help people out.

NG48 acts much differently on my car...and I'm still getting used to it and learning it's intricacies so there isnt a real solid way to make a basemap write-up for this version yet.

Julio came to me and offered to pay me for the help...I graciously accepted and will help him make a few variations of basemaps and maybe some little remote tweaking. He gets 1st dibs...obviously :P

Chris Harris is offline  
Old 08-25-2004, 10:33 AM
  #9  
3.0 BAR
Thread Starter
 
Join Date: May 2003
Posts: 5,381
Default Re:Going to run Turbo edit...need a good Chip burned ..

Originally Posted by xenocron
Originally Posted by green91
xenocron, i know you stay pretty busy but if you could assist me some with a basemap it would be greatly appreciated! may be fairly close to julios, its a d15b2 with pm6 ecu, mpfi etc..
I would say start small, use the NG28 code and use my BASEMAP write-up that I wrote to help people out.

NG48 acts much differently on my car...and I'm still getting used to it and learning it's intricacies so there isnt a real solid way to make a basemap write-up for this version yet.

Julio came to me and offered to pay me for the help...I graciously accepted and will help him make a few variations of basemaps and maybe some little remote tweaking. He gets 1st dibs...obviously :P

money talks.. :P

hey bud, ill paypal you today!
juli0_bustamante is offline  
Old 08-25-2004, 09:45 PM
  #10  
1.0 BAR
 
Join Date: Jan 2003
Posts: 469
Default Re:Going to run Turbo edit...need a good Chip burned ..

i have a question about that... every time you burn a new chip do you have to solder it in everytime or is there a way to just plug it in? also where can i find a burner and spare chips... i would like to try this
jpcrx is offline  

Thread Tools
Search this Thread
Quick Reply: Going to run Turbo edit...need a good Chip burned ..


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.