Got datacable today, not sure if it will work (Pic)
#12
Re: Got datacable today, not sure if it will work (Pic)
thanks, and yes I do have the shielding connected to the black(ground) wire.
Edit: BTW what does the J12 jumper do, it must be there for some reason. I will take it out and try tho.
Edit: BTW what does the J12 jumper do, it must be there for some reason. I will take it out and try tho.
#13
Re: Got datacable today, not sure if it will work (Pic)
I got that cable to work. You need to look at this pin out.
http://pinouts.ru/CellularPhones-Nok...p_pinout.shtml
Typically known as the DKU-5
http://pinouts.ru/CellularPhones-Nok...p_pinout.shtml
Typically known as the DKU-5
#16
Re: Got datacable today, not sure if it will work (Pic)
GRRRRRR this pos still isnt working, I now have it wired correctly, thanks to CSaddict's pin-out. I also installed the driver that came on a cd with the cable, It said the new hardware was installed correctly, after i restarted, it wont even agnowledge (beep like it normally does) when i'm plugging the usb into it. I still have yet to see ANYTHING work. I took out jumper J12. If you know what any of the settings in EcuControl are supposed to be set at let me know, I need.....
1. port and speed
2.datalog settings
3. communication settings
Also I go up the the ECU tab on the drop down menu and click OBD1-Uerdata-CromeROM.
let me know what you think, thanks.
1. port and speed
2.datalog settings
3. communication settings
Also I go up the the ECU tab on the drop down menu and click OBD1-Uerdata-CromeROM.
let me know what you think, thanks.
#18
Re: Got datacable today, not sure if it will work (Pic)
Ok so I understand that I have to reburn my chip with some datalogging? I have a willems enhanced using 29c256 chips on crome, where in crome do I find this and does anyone know how? I would really like to get this thing working soon, thank you.
#19
Re: Got datacable today, not sure if it will work (Pic)
Ok, so I enabled the RTP or whatever the ---- it is in crome and burned a new chip, it still doesnt work, i'm on the right com port. I'm stumped, does crome need to be running or somthing, i dont know what the ---- is going on, ive tried everything i can think of
I did smell somthing the first time I tried it, is it possible i burned out the converter in the cable? It knows when i plug the cable in so I'm thinkin its still good.
anything?!?
I did smell somthing the first time I tried it, is it possible i burned out the converter in the cable? It knows when i plug the cable in so I'm thinkin its still good.
anything?!?