Try the drivers that came with your cable. Thats the only way mine works

 

thanks, and yes I do have the shielding connected to the black(ground) wire.


Edit: BTW what does the J12 jumper do, it must be there for some reason. I will take it out and try tho.

 

I got that cable to work. You need to look at this pin out.

http://pinouts.ru/CellularPhones-Nok...p_pinout.shtml

Typically known as the DKU-5

 

Hey thanks! This may be a breakthrough

edit: What program are you using this with, just wondering

 

I used it with ecu control.

 

GRRRRRR this pos still isnt working, I now have it wired correctly, thanks to CSaddict's pin-out. I also installed the driver that came on a cd with the cable, It said the new hardware was installed correctly, after i restarted, it wont even agnowledge (beep like it normally does) when i'm plugging the usb into it. I still have yet to see ANYTHING work. I took out jumper J12. If you know what any of the settings in EcuControl are supposed to be set at let me know, I need.....

1. port and speed
2.datalog settings
3. communication settings

Also I go up the the ECU tab on the drop down menu and click OBD1-Uerdata-CromeROM.

let me know what you think, thanks.

 

AFlso on that pinout, Pin5 is USB VBus, do i need this attached to the ecu? u currently do not, just the ground, Rx, and Tx.

 

Ok so I understand that I have to reburn my chip with some datalogging? I have a willems enhanced using 29c256 chips on crome, where in crome do I find this and does anyone know how? I would really like to get this thing working soon, thank you.

 

Ok, so I enabled the RTP or whatever the ---- it is in crome and burned a new chip, it still doesnt work, i'm on the right com port. I'm stumped, does crome need to be running or somthing, i dont know what the ---- is going on, ive tried everything i can think of

I did smell somthing the first time I tried it, is it possible i burned out the converter in the cable? It knows when i plug the cable in so I'm thinkin its still good.

anything?!?

 

i couldnt get the shitty nokia cable to work either. Eventually you'll give up like me and buy one from xenocron for $30