Re: can't launch
 

The turbine housing are facing driver side and exhaust housing passenger side, about the map yes, maybe are wrong but why i have same problem using FMU?

And about inyectors, lets remember using chipped ecu i use 450cc and with FMU i use stock 240cc but have same problem, son the problem aren't the inyectors

Re: can't launch
 

how's your fuel pressure? what rate is the fpr? and how much boost you running?

Re: can't launch
 

So if you have the fmu on and the turbo hooked up, if you ease to just over 2k the car will run fine throughout different loads and/or rpm?

Cause I'd make sure that your check valves are installed in the proper direction. It sounds kinda like symptoms of limp mode, but you'd have a cel for that. Do you get a cel?

Re: can't launch
 

Re: can't launch
 

I don't get it. he said he's running check valves....i'm suggesting that maybe they are installed in the wrong direction. What do you mean?

Re: can't launch
 

Check valves are ok, but using uberdata with 450s have same problem and theres no need of check valves

Re: can't launch
 

what version are u using?

quite todo hasta dejarlo stock... luego corra solo con la ecu w/ uberdata y haber que pasa ..esta corriendo en open loop o closed?

Re: can't launch
 

wow......walter speaking his native language........i forgot he had one

Re: can't launch
 

im not chicano ;D ... somethings it's better speaking in spanish to me when i want to say something and it's a lil difficult to me in english...

i said that..

leave all stock again..runing only with ecu w/ uberdata and looks what happens..are ur runing in open loop or just closed loop? ..im right? ;D

too to say.. take out that ------- check valves...

Re: can't launch
 

Ok, right now i leave the car as stock, and quit the jumper from the ecu, and the car runs perfect, but you say to use the ecu w/uberdata and my actual bin and see what happens?