Re: Cant get turboedit to data log?
 

I will give that a try and let you know how it works.

Re: Cant get turboedit to data log?
 

i was getting the exact same thing, i sold it and went ODB1

Re: Cant get turboedit to data log?
 

ok here is my step by step of what im doing,

start my car
pulg in my usb to com 6, thats where my driver loaded
open turbo edit
goto file, open, my ng60 bin
Go to tools, options, comunications, set dataloging to com6, set rtp to com 1, baud rate to 38400 apply and close
then I go to File, Dataloging
click conect, start loging.

thats where it ends.
nothing happens on my screen, but the green light on my cable bilnks green.
WTF? :7

Re: Cant get turboedit to data log?
 

im guessing you are using the TE plugin? do you have your wideband settings right? sample rate?

also, is your datalogging cable soldered to the board? or is it removable? i had a similar issue with my serial cable, turns out that i had it plugged into the board backwards...

Re: Cant get turboedit to data log?
 

well i tried everygthing, so this morning I thought ---- it I will pull my pm6 out and put the data loging conection on to my pr4. So I flip ovet the pm6 pull the screws out and low and behold what do I see? A ------- microscopic chunk of solder sitting between 2 pins on the header. So I scraped my finger across it and it fell out from between the two. Im ------- so pissed of that I didnt check to see if it was that first. Just a :1 mistake. So now I get a runtime error with te,I can log now with ecu control but still no te?

Re: Cant get turboedit to data log?
 

Hrm...runtime error, that I am clueless on. I wish TE was still being developed :(

Re: Cant get turboedit to data log?
 

Well I uninstalled te and reloaded it and wala!!!!! ------- bad ass, now I just need to run my plx to my ecu so I can datalog my wideband info . Thanks for the help Chris, to bad Im a ------- noob and Was ready to give up. But it payed off sticking to it. ;D

Re: Cant get turboedit to data log?
 

Glad you got it working 8)

Re: Cant get turboedit to data log?
 

i dont understand that either i used a freinds computer it would work for like 2-3 mins and then frezze up and say rumtime error i used diffrent laptop and it worked fine ??

Re: Cant get turboedit to data log?
 

Can someone tell me why you must use the NG60 code. Im using the NG55 and its working