Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Cant get turboedit to data log?

Old 01-17-2007, 11:28 PM
  #1  
0.0 BAR
Thread Starter
 
Join Date: Jan 2006
Location: Mother Fucking Washingtion
Posts: 0
Default Cant get turboedit to data log?

I Have a pm6 and a data loger that I installed the other day. I also Download TurboEdit Version 2.6.1 From chris. I cant figure out how to make it work, or the order to set up the dataloger features. If some one has a step by step that thay could point out, it would help out.
-SKUM- is offline  
Old 01-18-2007, 01:18 AM
  #2  
3.0 BAR
 
Join Date: Apr 2006
Posts: 3,015
Default Re: Cant get turboedit to data log?

the TE datalog is hard to get to work just search yahoo or goggle and download ecucontrol 5 or whatever the latest version is and try again
sikcrx89 is offline  
Old 01-18-2007, 07:32 PM
  #3  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Cant get turboedit to data log?

I disagree...the version posted on my site is the only I can get to work.

You must be using NG60 code 1st! And your drivers must installed properly and your COM ports setup accordingly...
Chris Harris is offline  
Old 01-18-2007, 09:00 PM
  #4  
3.0 BAR
 
Join Date: Apr 2006
Posts: 3,015
Default Re: Cant get turboedit to data log?

Originally Posted by xenocron
I disagree...the version posted on my site is the only I can get to work.

You must be using NG60 code 1st! And your drivers must installed properly and your COM ports setup accordingly...
thanks chris i may try that out have you set it up on win 98 or have you mostly used xp? it wont work ng55 or ng48?
sikcrx89 is offline  
Old 01-18-2007, 09:12 PM
  #5  
0.0 BAR
Thread Starter
 
Join Date: Jan 2006
Location: Mother Fucking Washingtion
Posts: 0
Default Re: Cant get turboedit to data log?

I tried the ng55 and I couldent get it to work, Chris said it had to be a ng60 so I burned a ng60 and I still couldnt ge tit to work. I want to smash this ---- all over the street. Its so ------- frustrating!!!!!
-SKUM- is offline  
Old 01-18-2007, 09:21 PM
  #7  
0.0 BAR
Thread Starter
 
Join Date: Jan 2006
Location: Mother Fucking Washingtion
Posts: 0
Default Re: Cant get turboedit to data log?

I tried every com port that I coud and still nothing.
-SKUM- is offline  
Old 01-18-2007, 09:51 PM
  #8  
3.0 BAR
 
Join Date: Dec 2004
Posts: 1,976
Default Re: Cant get turboedit to data log?

are you getting any error messages?
ryan89crx is offline  
Old 01-18-2007, 10:05 PM
  #9  
0.0 BAR
Thread Starter
 
Join Date: Jan 2006
Location: Mother Fucking Washingtion
Posts: 0
Default Re: Cant get turboedit to data log?

Only when it was in the wrong port. I can get it to conect, then I press start loging and the light on the usb conector starts blinking green, but nothing shows up on my screen. If I press the active dash everthing gos all fucked up. It says that im doing 65 mph and my water is like 165* and my intake temp is 165*, but im just at idle.
-SKUM- is offline  
Old 01-18-2007, 11:32 PM
  #10  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Cant get turboedit to data log?

TOOLS --> OPTIONS--> Communication

#1 - Set datalogging to the COM port assigned by your drivers (find this in the device manager, dont just try random COM ports)

#2 - Set real time programming to the proper COM port or something other than your datalogging port if not using Ostrich

#3 - Baud Rate 38400

APPLY AND CLOSE

FILE --> DATALOGGER

Connect

Start Logging

Chris Harris is offline  

Thread Tools
Search this Thread
Quick Reply: Cant get turboedit to data log?


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.