Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Burn one problem again

Old 08-11-2007, 01:33 AM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Sep 2006
Posts: 221
Default Burn one problem again

For the life of i cannot get a .bin file to burn right.It runs good in boost on a stock ecu, but not a chipped one.
No i'm not flooring with a stock ecu.Every .bin i burn cuts out in boost.It's like it hits a fuel cut.
I'm running a very small *** volvo turbo,obd2 to obd 1 harness,chipped p28,240cc injectors,NGK-11 cold *** plug.

I have some 460 injectors, i'll put in tomorrow. I don't think that's going to help me if, i can't burn the rom right.All
my setting on the burner is correct.I can burn a stock rom and it runs fine. It cuts out at 5000 or when it see 4-5 psi of boost.
Every freaking bin i burn.

If i change any of the setting's in uber on a rom, i have too import a p28 correct?
civicsihatch09 is offline  
Old 08-11-2007, 01:53 AM
  #2  
0.0 BAR
 
Join Date: Oct 2005
Posts: 0
Default Re: Burn one problem again

wow, get your setup complete before you do anything else.

1st question, why the hell are you still using Uberdata? It is pretty much an abandoned project. Crome has tons of features and is still in constant development.

I haven't used UD in a long *** time, but you will first start out with the stock GSR bin. Tehn you import whatever is closest to whatever engine you are running. Assuming you are running a D16Y8, then you need to import a P28 map.

The Burn1 itself is pretty damn idiot proof. I think you are most likely running into a problem of not knowing how to set up your ROM. Read the FAQs some more if need be.
JonDouglas is offline  
Old 08-11-2007, 01:59 AM
  #3  
3.0 BAR
 
Join Date: Apr 2005
Posts: 4,890
Default Re: Burn one problem again

crome
bitchasscracker is offline  
Old 08-11-2007, 02:06 AM
  #4  
1.0 BAR
Thread Starter
 
Join Date: Sep 2006
Posts: 221
Default Re: Burn one problem again

I'll try to use crome.I only had one map 2 years ago that worked.bbka 1.66 240cc tune..All the other ones don't work.Atleast not for me.

Yeah its a pos d16y8.I need to go back with a d15z1 vx block.Its the only one i had luck with.
civicsihatch09 is offline  
Old 08-11-2007, 02:22 AM
  #5  
0.0 BAR
 
Join Date: Oct 2005
Posts: 0
Default Re: Burn one problem again

Xenocron has a pretty damn good writeup on ow to make a basemap with Crome
JonDouglas is offline  
Old 08-11-2007, 02:29 AM
  #6  
1.0 BAR
Thread Starter
 
Join Date: Sep 2006
Posts: 221
Default Re: Burn one problem again

Thanks i'll check it out.
civicsihatch09 is offline  
Old 08-15-2007, 03:42 AM
  #8  
1.0 BAR
Thread Starter
 
Join Date: Sep 2006
Posts: 221
Default Re: Burn one problem again

Originally Posted by ghettoturbo
....your problem is that youre trying to run 240s imho. Put in the bigger injectors and make a basemap for them.

Did it with crome, runs like a champ..Except part throttle.I put the 460's in.
civicsihatch09 is offline  
Old 08-19-2007, 09:06 PM
  #9  
3.0 BAR
 
Join Date: Mar 2003
Posts: 21,494
Default Re: Burn one problem again

Originally Posted by snm95ls
The Burn1 itself is pretty damn idiot proof.
My computer disliked the burn1. Once I finally got it to work it was ------- awesome, but before that time I would have talked you out of buying one. I'm a retard when it comes to computers so that might have something to do with it though. :1


Originally Posted by ghettoturbo
....your problem is that youre trying to run 240s imho. Put in the bigger injectors and make a basemap for them.

That's where I'm putting my money.

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Dr.Boost is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
heyseemoreh22
General Discussion
72
01-15-2009 02:26 AM
J-SMITH69
General Discussion
13
04-18-2008 06:55 PM
civicsihatch09
Engine Management
9
02-03-2007 12:15 PM
Hondasi88
Wanted
2
08-01-2006 12:44 PM
abakedpotato
Engine Management
3
05-15-2004 05:40 PM


Thread Tools
Search this Thread
Quick Reply: Burn one problem again


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.